Releases: nysthi/nysthi
Releases · nysthi/nysthi
v2.0.13 slim label, slim voltage + debug simpliciter multi and sevenseas 2
#v2.0.13 (2021-12-29)
SIMPLICITER MULTI
- debug visuals when recording CV in PRE-RECORD MODE
- moved the INTERPOL(ation) flag on the "Output" side (it's the correct place)
POLYSEVENSEAS 2
- fixed a crash with Drag and Drop
- fixed saved BANKS: correctly reloaded now
VOLTAGE Dual
- a DUAL super slim editable inline FIXED VOLTAGE EMITTER (by request)
LABEL slim
- a small LABEL (by request)
v2.0.12 AKA the BURRUMBALLA : new modules SIMPLICITER MULTI - POLYSEVENSEAS 2 - NUDGER - VOLTAGE - LABEL
#v2.0.12 (2021-12-28)
SLIM SIMPLER
- new feature: the START of sample control, now controls the STOP/END position if goes in negative and START position if in positive
SIMPLICITER
- starts the crossfade time between REC and PLAY to ZERO
- implement the pause RECORD: pressing on the RED button REC, with the COMMANDKEY down, the REC timer will be stopped and RECORDING will stay in pause until a new TAP (or PULSE) on the REC button for a CONTINUE
- debug a crash in headless mode
- add a new PLAY MODE: PING PONG MODE (via contextual menu)
- bug: if in "output 0V if stopped" mode, transition between loop - no-loop - loop will mute (corrected)
SIMPLICITER MULTI
- a multi track (from 1 to 16 tracks) sample player/recorder
- (recording you are on your own! depends on your memory)
- can do prerecord mode (til 120 secs) or standard record mode, Direct to Disk
- Playing is always (like in all simpliciter/sampler) using memory
- can record up to 16 tracks of CV data and save in a WAV file at 100hz (the feature is activated using the "CV" button in INPUT zone
MUSICALBOX MUSICALBOX2
- add exclusive play mode (activable using contextual menu). When ON, only one sampler at time can play
POLYSEVENSEAS 2
- variable geometry of the sample cube
- supporting till 8192 points waves (contextual menu from 256 to 8192)
- from 8 to 64 waves per bank (contextual menu)
- at startup is the same as the POLYSEVENSEAS standard, loading the base table of 64 x 64 x 256
but you can do a CLEAN all LOAD banks, change the geometries (the dependent variable is the BANK number, for example if you set 64 waves of 8192 points, there will be only 2 banks (2 x 64 x 8192 = 1048576 sample points)
or you have a classic geometry of 32 * 16 * 2048 (hosting 32 SERUM banks of 16 waves)
when you fill it, you can save as GLOBAL bank and reuse in the defaults
STEREOCHORUS 2
- accepting poly signals now (bug)
PROGRAMMER
- added commands to copy track to track
- added command to nudge forward (shift the sequence to the left, one step) and backward (shift the sequence to the right, one step) per track
NUDGER
- expander for the SERGE Programmer adding controls for nudging and CV signals
- GLOBAL NUDGE via tap button or pulse signals (all tracks). FORWARD or BACKWARD.
- TRACK NUDGE via tap button or pulse signals track by track. FORWARD or BACKWARD.
- CV control of nudge, if CV is in nudging will be modulated in semitones (2 semitone, 2 nudges... example)
- Global CV Adder (the central one) (add a CV to all TRACKS)
- Track by track CV ADD
## S.A.M.
- add EOC pulse OUT when the sentence is complete
SIMPLER TAPE CONTROL
- added a TRIG IN TOGGLER to do instantaneous change between play directions
VOLTAGE
- a single slim editable inline FIXED VOLTAGE EMITTER
LABEL
- a single slim editable inline LABEL, multiline
MULTIVOLTIMETRO
- add VOLTAGES SORT for polyphonic incoming voltages (ascending - descending)
- add poly voltage merging
- poly voltage are positional and overridable (if you insert a 4 chan in position position 10
channel 10 11 12 and 13 will be used
NYSTHIOMETER
- add ZSTD decompress utility on drag and drop of files for type "vcvx" :D
- add ZSTD compress utility on drag and drop of directories with type "vcvx"
THE CAGE
- solved the case of missing saved scales :D (always same problem of inverted startup v2 sequence)
POLY LPG
- added missing bypass
ETCHASKETCHOSCOPE
- add history to Beam Size CV in (so can act as Z channel)
## LFOMULTIPHASE
- add Poly out from output 1 (8 phases)
## LFOMULTIPHASE2
- add Poly out from output 1 (6 phases)
## TZOP
- add full detach mode (carrier modulation and any other expander mode)
v2.0.11 new features in simpliciter + new skins + debugging
v2.0.11 (2021-12-07)
- added dark theme "spectromas_dark_01"
- added dark theme "spectromas_darknight_02"
PROGRAMMER
- debug the knob values not loaded correctly in V2
- debug current stage on load (not loaded correctly in V2)
MASTER RECORDER 2
- debug export mp3 when in 320kbs (this is a bug in the lameMP3 lib using the CBR mode)
from this version the 320kbs (and only the 320) is done in VBR mode - changed default encoding mp3 mode to cbr-192kbs
SIMPLICITER
- debug missing PEAK menus !
- debug a crash deleting all SLICEs whne playing using slices
- add menu for equal division of current selection (new slices will be added to the slice sequencer)
EQUAL DIVISION QUANTIZER
- debug not saving status in v2
v2.0.10 2nd massage to fonts
#v2.0.10 (2021-12-03)
- removed all the load fonts from constructors (not used, but just to be sure)
v2.0.9 massage to mixer
#v2.0.9 (2021-12-03)
- massage to mixers (delaying some inits when coming from file)
v2.0.8 (2021-12-03) font massaging
#v2.0.8 (2021-12-04)
- font massaging
v2.0.7 (2021-12-02) debug jooper pepper thecage
#v2.0.7 (2021-12-02)
JOOPER
- crash opening v1 files
PEPPER
- crash opening v1 files
THECAGE
- not saving data in fields, in v2
NYSTHI v2.0.6 (2021-12-01)
gm release
#**v2.0.0 (2021-12-01)
CONVOLVZILLA
- crash opening it
BITSHIFTER
- add poly output from Output 1 (top left) (activated via contextual menu)
XATTO TIME
- bug update displays
CLOCKABLEDELAY
- bigger resolution to feedback
- add ping pong mode
all B208 modules
- new style courtesy of
Pyer! <3
New KNOBS
- courtesy of
Jojo blue
New SOCKETS
- courtesy of
Pyer
## LFOMULTIPHASE
## LFOMULTIPHASE2
- added scale and offset internal
SEVEN SEAS
POLYSEVEN SEAS
- removed multithreading in WIN and LINUX builds
- Now multithreading on MAC is by default OFF (you can switch ON using the contextual menu)
XATTO TIME
- is a complete new module
- works in audio and CV
- 4 super precise delays with msecs precision from 0.01 to 9999.99 msecs
- tempo can be clocked with a pulse and is applied a multiplier to it
- controls:
-
IN (main input) -
IN2 (secondary input) -
IN2GAIN (secondary input with gain from -1 to +1) (to have very complex patch of delays of delays) -
DRY-WET control -
CV Msecs (delay is determined via CV) (different mapping functions selectable via contextual menu) -
MSECS DELAY drag display (from 0.01 to 9999.99 msecs. It's a drag display: the click and drag zone is IMPORTANT! -
FB (feedback) from -0.9999 to +0.9999 (how much of the signal is feed back into the delay) -
CLK (clock input for the time trigger) -
CLK multiplier drag display (from 0.01 to 99.99) -
OUT, the output
SIMPLER FILE CONTROLLER EXPANDER
- and expander for the complex Simpler and slim Simpler to navigate list of files in directories
- commands:
- PREV sample
- NEXT sample
- CV sample (voltage based selection will respect Midi notes)
- RND sample (random sample)
SLIM SIMPLER
- a small sample player with all the complex simpler features
- added list of FILES (all the files audio in the same dir will be listed and usable)
- added limiter to size of files (via contextual menu)
METERS (DUAL MONO SLIM)
- support for voltages added
- using contextual menu is possible to switch from 0 to 10V to -5v to 5v representations
POLY VOLTAGE METER
- an utility to present poly voltages, in small spaces
- using contextual menu is possible to switch from 0 to 10V to -5v to 5v representations
COMPLEX SIMPLER
- full redesign
- added CV for SPEED
- added list of FILES (all the files audio in the same dir will be listed and usable)
- added limiter to size of files (via contextual menu)
CONFUSING SIMPLER
- add a RND input for the GRID SLICE mode (insted of using the RND input in SLICE sequencer)
POLY SCALA QUANTIZER
- debug: was not loading the selected scale reopening a file at RACK relaunch
ALL MODULES
- debug: led display to support lights
RAEL
####Imperial Aerosol Kid
-
is the probabilistic version of ELSKER with some added features
-
it's a PULSE and GATE programmer with LOOPING and SEQUENCING abilities
-
there are 12 GATE PULSE programmers
-
every GATE PULSE PROGRAMMER contains
- TAP TRIG and TRIG IN to start the action
- TAP ON OFF and TRIG ON OFF to ACTIVATE/DEACTIVATE
- in violet
- a draggable display for the DELAY TIME in SECONDS from 0 to 999.999 seconds
- it's the DELAY time for the GATE activation
- a draggable display for the PROBABILITY for the delay, from 0.0 to 1.0
- the final time is given by this formula
- DELAY * PROBABILITY + DELAY * ((1 - PROBABILITY * RANDOM(0,1) - 0.5)
- a small display to present the effective DELAY time (in violet)
- in green
- a small display to present the effective DURATION
- a draggable display for the DURATION TIME in SECONDS from 0.001 to 999.999 seconds
- it's the DURATION of the GATE
- a draggable display for the PROBABILITY for the duration, from 0.0 to 1.0
- the final time is given by this formula
- DURATION * PROBABILITY + DURATION * ((1 - PROBABILITY * RANDOM(0,1) - 0.5)
- GATE OUT
- SOG (START of GATE pulse OUT)
- EOG (END of GATE pulse OUT)
- LOOP (it's like a connected cable from EOG to TRIGIN), will restart the process
- it's good for gate LFOs or wobbly timers/triggers
-
GLOBAL commands
- GLOBAL TRIG (TAP TRIG + TRIG INPUT)
- will trig all the 12 progreammers at once
- RESET
- will reset any runner programmer and also the FLAG "ONE SHOT"
- 1 SHOT on off mode
- if active all the programmer will respond only to the first TRIG and a RESET to clean the FLAG will be needed to ARM again the PROGRAMMERS
- GLOBAL GATE OUT
- GLOBAL SOG OUT
- GLOBAL EOG OUT
- SEQUENCE mode ON OFF
- it's like to have a the EOG pulse out connected to the next programmer, from 1 to 12
and the the 12th is connected to the 1st TRIG in
- it's like to have a the EOG pulse out connected to the next programmer, from 1 to 12
the CLOCK-IN mode
-
if a clock is incoming the 2 display will be activaded and will show the informations about the clock
- time differential between trigs, in msecs
- value in BPM of the incoming trig
-
when a clock is in the values of the programmers DURATIONS and DELAYS are no more considered as time
but as multiplier of the incoming clock
for example, let's say you are getting a 2 hz clock, 120 bpm (500 msecs between trigs)
and your programmer is set to DELAY of 0.5 and the GATE to 0.25
means that the GATE will start at (0.5 * 0.5), 0.25 seconds with a duration of (0.25 * 0.5) 0.125 msecs
of course thing become complicated adding probabilities - GLOBAL TRIG (TAP TRIG + TRIG INPUT)
4HANDS
- feature request: added INSERT scene command, via TAP and TRIG IN
the insert mode is BEFORE current scene
CONFUSING SIMPLER
- add a grid on off microbutton (in GRID area, close to GRID title)
- add a RND on EOC mode for the SLICE sequencer, is valid if GRID MODE is OFF
- add: if in GRID mode the RANDOM select input in the slice area will select a RANDOM GRID selection
SIMPLICITER
- add a RND on EOC mode for the SLICE sequencer, is valid if GRID MODE is OFF
- add: if in GRID mode the RANDOM select input in the slice area will select a RANDOM GRID selection
- debug: if in GRID mode other action from SLICE area are disabled
SIMPLICITER
CONFUSING SIMPLER
-
feature request: add capability to import "cue " chunks from WAV files (we can import now Morphagene splice points)
rules are:- As in Morphagene we have splices and in SIMPLICITER slices, we import them as ranges
slice 1 is splice1 to splice 2
slice 2 is splice 2 to splice 3
etc- If SIMPLICITER contains already slices, no splices will be imported
- if 2 or more contiguous splices are of the same value, only one will be considered
- Last splice will always create a slice going from "last splice" to "end of sample" (only special case if last splice IS last sample)
-
new export functionality, the Save as WAV command will export slices as CUE points
- A list of slices must exist
- Only the START of every slice will be exported as CUE POINT
##µSQ2
- solved a crash removing the module
STEREOCHORUS-TREMOLO
NYSTEREOCHORUS
- DEBUG: nasty NaN at the startup (in some case)
BZ-MAPPER
- DEBUG: current NODEs status not highlighting
BZ-ENVELOPE
- DEBUG: current NODEs status not highlighting
SIMPLICITER
- DEBUG: "STOP recording with append" was inverting channels (#338)
- FEATURE REQ: press REC with SHIFT to activate automatic APPEND for current REC
CONFUSING SIMPLER
- DEBUG: "STOP recording with append" was inverting channels (#338)
- FEATURE REQ: press REC with SHIFT to activate automatic APPEND for current REC
POLY SCALA QUANTIZER
- DEBUG: in midimap mode, the root base (from contextual menu) must be applied to
extra outputs too (#333)
PROGRAMMER
- feature request from Pyer: add a contextual menu to use a STROBE signal to sample
the incoming CV signal in ADDR. The STROBE signal is the PULSE in > and PULSE in <
sockets.
02NAGOL
- feature request: add reload trigger
SLOPE DETECTOR
- classic CGS module
- detects rise steady and fall states on signals and outputs a GATE
CV SPREAD
- simple module in Serge style
- creates correlated CV out from a INPUT and OFFSET
DUAL PROCESSOR
- classic CGS module
- dual CV/audio mixer, scaler, offsetter
INFINITE MELODY
-
highly inspired from the BOCGS MARSH panel CGS module
-
it's a CV melody generator based on a set of 1 BITSHIFT register + 4 analogue shift register
-
a signal must be sent to the NOISE input
the signal is compared against the SENSE knob value (or to the VC SENSE input,
if connected)
when the incoming value is greater than SENSE the LED is ON, otherwise is OFF
the LED on represent binary 1 and OFF is binary 0.
If a clock signal is applied to CLOCK the bitshift register is shifed to the left
and the value of SENSE comparator is written in the first bit.
EXAMPLE with 6 clock consecutive:
main register status 000 000 (only 6 bits are important)
pulse 1 -> SENSE is 1 --> main register is 000 001
pulse 2 -> SENSE is 1 --> main register is 000 011
pulse 3 -> SENSE is 0 --> main register is 000 110
pulse 4 -> SENSE is 1 --> main register is 001 101
pulse 5 -> SENSE is 0 --> main register is 011 010
pulse 6 -> SENSE is 1 --> main register is 110 101there is a secondary clock coming in ADVANCE
for every pulse in ADVANCE the main register is advanced into the 4 digital shift registerthe ADVANCE can be in 1/f mode or f mode (called RANDOM MODE)
in f mode the result is this:
simulating the main register with 110 101
pulse 1:
reg1 110 101
reg2 000 000
reg3 000 000
reg4 000 000pulse 2: ...
v2.0.6beta6 (2021-12-01) (git tag: v2.0.0 Rack Free) Pre-release
#v2.0.0beta6 (2021-12-01) (git tag: v2.0.0 Rack Free)
CONVOLVZILLA
- crash opening it solved (was due to some changes in the startup sequence of the V2)
BITSHIFTER
- add poly output from Output 1 (top left) (activated via contextual menu)
attempt to solve the crash happening on some MAC OSX 10.13 (reducing the code in nysthi_files
v2.0.0beta5 (2021-11-30) (git.b3b7b652 beta2 Rack Free)
linux ok mac ok ?
:)
XATTO TIME
- bug update displays
CLOCKABLEDELAY
- bigger resolution to feedback
- add ping pong mode