Releases: gem/oq-engine
Releases · gem/oq-engine
OpenQuake Engine 3.14.0
Release 3.14.0
[Michele Simionato (@micheles)]
- Changed the definition of
aggrisk: dividing by the effective time - Internal: removed flag
save_disk_spacesince now it is always on - Slightly changed the collapsing of nodal planes and hypocenters in
presence of the equivalent distance approximation (reqv) - Extended
oq reduce_smto multiFaultSources - Fixed the check on unique section IDs for multiFaultSources
- Implemented multi-aggregation with a syntax like
aggregate_by=taxonomy,region;taxonomy;region - Removed the obsolete commands
oq to_shapefileandoq from_shapefile
and turned pyshp into an optional dependency - Setting
num_rlzs_disagg=0is now valid and it means considering
all realizations in a disaggregation calculation - Rounded the magnitudes in multiFaultSources to two digits
[Marco Pagani (@mmpagani)]
- Extended ModifiableGMPE to work with GMPETable and subclasses
[Michele Simionato (@micheles)]
- Upgraded shapely from version 1.7 to version 1.8: this causes slight
changes in the results for most calculations - Removed the not used (and not working) functionality
applyToSourceType - Raised an error when the total standard deviation is zero, unless
truncation_level is set to zero
[Tom Son (@SnowNooDLe)]
- Fixed a typo and a few bugs within Kuehn et al. (2020) model to include
Z2.5 when the given region is JAPAN
[Michele Simionato (@micheles)]
- Changed /extract/events to return events sorted by ID
- Changed the default amplification method to "convolution"
- Fixed a bug with discard_trts sometimes discarding too much
- Raised a helpful error message when ensurepip is missing
- Fixed parentdir bug in event_based_damage
- Fixed sorting bug in the
/v1/calc/runweb API - Internal: introduced limited unique rupture IDs in classical calculations
with few sites
[Prajakta Jadhav (@Prajakta-Jadhav-25), Dharma Wijewickreme (@Dharma-Wijewickreme)]
- Added GMPE Youd et al. (2002) and the corresponding site parameters
[Michele Simionato (@micheles)]
- Fixed the exporter
aggrisk-statsin the case of zero losses - Vectorized all GMPEs and forbidden non-vectorized GMPEs
- Raised the limit to 94 GMPEs per tectonic region type
- Optimized the NBCC2015_AA13 GMPEs
- Optimized the GMPETable and the derived NGAEast GMPEs
- Fixed a 32/64 bit bug in
oq export loss_maps-stats
[Marco Pagani (@mmpagani)]
- Added a more flexible version of the GC2 implementation
- Added caching of distances in multi fault ruptures
- Added the NRCan site term to the modifiable GMPE
[Michele Simionato (@micheles)]
- Optimized .get_bounding_box, .polygon and .mesh_size for MultiFaultSources
- Fixed bug in presence of mixed vectorized/nonvectorized GMPEs
- Extended
oq postzipto multiple files andoq abortto multiple jobs - Internal: changed install.py to install the venv in /opt/openquake/venv
- Fixed a BOM issue on Windows when reading job.ini files
Contributors
mmpagani, micheles, and 2 other contributors
Assets 2
OpenQuake Engine 3.11.5
Contributors
micheles
Assets 2
OpenQuake Engine 3.13.0
[Michele Simionato (@micheles)]
- Improved the precision of the
pointsource_distanceapproximation - Added command
oq show rlz:<no> - Internal: added an environment variable OQ_DATABASE
[Manuela Villani (@mvillani)]
- Added a function in the modifiable GMPE to convert ground-motion assuming
different representations of the horizontal component.
[Kendra Johnson (@kejohnso)]
- Implemented possibility of assigning the parameters
floating_x_stepand
floating_y_stepfor kite fault sources in the job configuration file
[Michele Simionato (@micheles)]
- The
branchIDis now autogenerated in the gsim logic tree files, thus
solving the issue of wrong branch paths for duplicated branchIDs - Added a check for missing gsim information in the job.ini file
- Fixed the case of continuous fragility functions with minIML=noDamageLimit
[Miguel Leonardo-Suárez (@mleonardos)]
- Added GMPE from Jaimes et al. (2020) for Mexican intraslab earthquakes
[Michele Simionato (@micheles)]
- Enforced ps_grid_spacing <= pointsource_distance
- Internal: added command
oq plot source_data? - The engine is now splitting the MultiFaultSources, thus improving the task
distribution
[Claudia Mascandola (@mascandola)]
- Added a new class to the abrahamson_2015 gmm.
- Added a new class to the lanzano_luzi_2019 and skarlatoudis_2013 gmms
[Marco Pagani (@mmpagani), Shreyasvi Chandrasekhar (@Shreyasvi91)]
- Added GMM from Bora et al. (2019)
- Fixed bug in the multifault surface when defined using kite fault surfaces
[Giuseppina Tusa (@gtus23)]
- Added a new gsim file tusa_langer_azzaro_2019.py to implement the GMMs
from Tusa et al. (2020).
[Michele Simionato (@micheles)]
- Added command
oq compare uhs CALC_1 CALC_2 split_sources=falseis now honored in disaggregation calculations- Internal: rup/src_id now refers to the row in the source_info table
[Miguel Leonardo-Suárez (@mleonardos)]
- Added the GMPE Arroyo et al. (2010) for Mexican subduction interface events
[Marco Pagani (@mmpagani)]
- Added a new method to the modifiable GMPE with which is possible to
compute spatially correlated ground-motion fields even when the initial
GMM only provides the total standard deviation. - Fixed a bug in the
modify_recompute_mmax - Added a
get_coeffsmethod to the CoeffTable class - Added support for EAS, FAS, DRVT intensitity measure types
[Michele Simionato (@micheles)]
- Extended the mag-dependent filtering to the event based calculator
- The flag discrete_damage_distribution=true was incorrectly ignored when
computing the consequences - Implemented
reaggregate_byfeature - Supported the
custom_site_idin the GMF exporters - Bug fix: the site collection of the child calculation was ignored when
using the --hazard-calculation-id option - Supported Python 3.9 and deprecated Python 3.6
- Extended
oq prepare_site_modelto support .csv.gz files - Solved the issue of "compute gmfs" slow tasks in event_based and used
the same approach in classical calculations too - Made sure
valid.gsiminstantiates the GSIM - ShakeMap calculations failing with a nonpositive definite correlation
matrix now point out to the manual for the solution of the problem - Introduced the GodaAtkinson2009 cross correlation between event model
- Specifying consequence files without fragility files now raises an error
- Fixed a bug in event_based_risk with nontrivial taxonomy mapping producing
NaNs in the event loss table - Internal: added kubernetes support from the WebUI
[Shreyasvi Chandrasekhar (@Shreyasvi91)]
- Added a new GMPE for significant duration proposed by Bahrampouri et al
(2021).
[Claudia Mascandola (@mascandola)]
- Added the computation of tau and phi stdevs to the sgobba_2020 GMPE
- Added a new class to the lanzano_2019 gmm.
[Michele Simionato (@micheles)]
- Changed completely the storage of the PoEs and reduced the memory
consumption in classical calculations (plus 4x speedup in "postclassical") - Changed the behavior of
sites_slice - Changed
custom_site_idto an ASCII string up to 6 characters - Fixed the error raised in presence of a mag-dep distance for a tectonic
region type and a scalar distance for another one
[Yen-Shin Chen (@vup1120)]
- Added the Thingbaijam et al. (2017) Magnitude Scaling Law for Strike-slip
[Michele Simionato (@micheles)]
- Changed the API of
ContextMaker.get_mean_stds - Extended the WebUI to run sensitivity analysis calculations
- Changed the string representation of logic tree paths and enforced a
maximum of 64 branches per branchset - Added command
oq info disagg - Accepted site models with missing parameters by using the global site
parameters instead - Supported the syntax
source_model_logic_tree_file = ${mosaic}/XXX/in/ssmLT.xml - Fixed a performance bug with ignore_master_seed=true
- Added a command
oq info cfgto show the configuration file paths - Added a check on the intensity measure levels with
--hcis used - Bug fix: pointsource_distance = 0 was not honored
- Fixed a small bug of
oq zip job_haz.ini -r job_risk.ini: now it works
even if the oqdata directory is empty - Optimized the aggregation of losses in event_based_risk and made it possible
to aggregate by site_id for more than 65,536 sites - Fixed the calculation of average insured losses with a nontrivial taxonomy
mapping: now the insured losses are computed before the average procedure,
not after - Unified scenario_risk with event_based_risk, changing the numbers
when producing discrete damage distributions - Added
aggriskoutput to event based damage calculation - Added parameter
discrete_damage_distributionin scenario damage
calculations and changed the default behavior - Deprecated consequence models in XML format
- Event based damage calculations now explicitly require to specify
number_of_logic_tree_samples(before it assumed a default of 1)
[Elena Manea (@manea), Laurentiu Danciu (@danciul)]
- Added the GMPE Manea (2021)
[Michele Simionato (@micheles)]
- Added a check against duplicated branchset IDs
- Improved error checking when reading the taxonomy mapping file
- Renamed conversion -> risk_id in the header of the taxonomy mapping file
[Antonio Ettorre (@vot4anto)]
- Bumped h5py to version 3.1.0
[Michele Simionato (@micheles)]
- Renamed the parameter
individual_curves->individual_rlzs - Reduced the number of disaggregation outputs and removed the long-time
deprecated XML exporters - Fixed the ShakeMap calculator failing with a TypeError:
get_array_usgs_id() got an unexpected keyword argument 'id' - Added
conseq_ratioin the aggcurves exporter for event_based_damage - Added a
conditional_spectrumcalculator - Fixed an array<->scalar bug in abrahamson_gulerce_2020
- Restored the classical tiling calculator
Contributors
mmpagani, danciul, and 10 other contributors
Assets 2
OpenQuake Engine 3.12.1
[Michele Simionato (@micheles)]
- Fixed a bug in event_based_risk with nontrivial taxonomy mapping producing
NaNs in the event loss table - Bug fix: pointsource_distance = 0 was not honored
- Improved the universal installer when installing over a previous
installation from packages - Fixed an error in
oq zip job_haz.ini -r job_risk.ini - Fixed the disaggregation Mag_Lon_Lat exporter header mixup
- Fixed the ShakeMap calculator failing with a TypeError:
get_array_usgs_id() got an unexpected keyword argument 'id' - Fixed the Abrahamson Gulerce GMPE failing with a scalar<->array error
Contributors
micheles
Assets 2
OpenQuake Engine 3.11.4
[Michele Simionato (@micheles)]
- Fixed a bug in the adjustment term in NSHMP2014 breaking the USA model
- Fixed the sanity check in event_based_damage giving false warnings
- Fixed the corner case when there are zero events per realization in
scenario_damage
Contributors
micheles
Assets 2
OpenQuake Engine 3.12.0
[Marco Pagani (@mmpagani)]
- Updated verification tables for Abrahamson et al. (2014) and checked
values with other public resources.
[Michele Simionato (@micheles)]
- Added command
oq info consequences - Improved error message for
area_source_discretizationtoo large - Improved command
oq info exports - Internal: changed the signature of hazardlib.calc.hazard_curve.classical
- Extended the multi-rupture scenario calculator to multiple TRTs
- Removed the experimental feature
pointsource_distance=? - Refactored the GMPE tests, with a speedup of 1-14 times
- Added a script
utils/build_vtableto build verification tables oq info gsim_logic_tree.xmlnow displays the logic tree- Fixed a bug in the adjustment term in NSHMP2014 breaking the USA model
[Graeme Weatherill (@g-weatherill)]
- Implements Abrahamson & Gulerce (2020) NGA Subduction GMPE
[Nico Kuehn (@nikuehn)/Graeme Weatherill (@g-weatherill)]
- Implements Kuehn et al. (2020) NGA Subduction GMPE
[Chung-Han Chan/Jia-Cian Gao]
- Implements Lin et al. (2011)
[Graeme Weatherill (@g-weatherill)/Nico Kuehn (@nikuehn)]
- Implements Si et al. (2020) NGA Subduction GMPE
[Michele Simionato (@micheles)]
- There is now a huge speedup when computing the hazard curve statistics
if numba is available - Made it possible to compute consequences in presence of a taxonomy mapping
- Fixed a bug in
get_available_gsims: GSIM aliases were not considered - Optimized the single site case by splitting the sources less
- Restricted the acceptable methods in GMPE subclasses
[Claudia Mascandola (@mascandola)]
- Added the Lanzano et al. (2020) GMPE
[Stanley Sayson (@stansays)]
- Added the Stewart et al. (2016) GMPE for V/H
- Added the Bozorgnia and Campbell (2016) GMPE for V/H
- Added the Gulerce and Abrahamson (2011) GMPE
- Corrected Campbell and Bozorgnia (2014) GMPE
[Michele Simionato (@micheles)]
- Fixed a subtle bug: in presence of a nontrivial taxonomy mapping, loss
curves could be not computed due to duplicated event IDs in the event
loss table coming from a int->float conversion - Forced a name convention on the coefficient tables (must start with COEFFS)
- Replaced IMT classes with factory functions
- Changed the
minimum_distancefrom a parameter of the GMPE to a
parameter in the job.ini - Supported consequences split in multiple files
[Claudia Mascandola (@mascandola)]
- Added the Sgobba et al. (2020) GMPE
[Michele Simionato (@micheles)]
- Improved the warning on non-contributing TRTs and made it visible
for all calculators - Fixed a bug in scenarios from CSV ruptures with wrong TRTs
- Added a limit of 12 characters to IMT names
- Forbidded multiple inheritance in GMPE hierarchies
- Added parameter
ignore_encoding_errorsto the job.ini - Extended the damage calculators to generic consequences
- Renamed cname -> consequence in the CSV input files
- Made sure the CSV writer writes in UTF-8
[Graeme Weatherill (@g-weatherill)]
- Updates Kotha et al. (2020) slope/geology model coefficients
[Michele Simionato (@micheles)]
- Improved
post_riskto use all the cores in a cluster, since it
was using the master only - Improved the validation of the investigation_time in event_based_damage
- Renamed the
losses_by_eventCSV exporter torisk_by_eventand
made it work consistently for losses, damages and consequences; also
removed theno_damagefield
[Marco Pagani (@mmpagani), Michele Simionato (@micheles)]
- Implemented MultiFaultSources
- Added method for computing rjb to kite surfaces
- Added support for new epistemic uncertainties in the SSC LT
[Michele Simionato (@micheles)]
- Fixed newlines in the CSV exports on Windows
[Graeme Weatherill (@g-weatherill)]
- Added Ameri (2014) GMPE for the Rjb case
[Michele Simionato (@micheles)]
- Optimized the slow tasks in event_based calculations
- Added an early check for fragility functions in place of vulnerability
functions or viceversa
[Marco Pagani (@mmpagani)]
- Numeric fix to the amplification with the convolution method
- Implemented the BakerJayaram2008 cross correlation model
- Fixed the calculation of distances for kite surfaces with Nan values
[Michele Simionato (@micheles)]
- Fixed logic tree bug: MultiMFDs were not modified
- Internal: added a view composite_source_model to show the sources by group
[Nicolas Schmid (@schmidni)]
- Added possibility to use *.shp files instead of *.xml files when
doing risk calculations from shakemaps.
[Michele Simionato (@micheles)]
- Rewritten the event_based_damage calculation to support
aggregate_by - Made it possible to run an event based risk calculation starting from a
parent ran by a different user
[Pablo Heresi (@pheresi)]
- Implemented Idini et al (2017) GSIM.
- Added dynamic site parameter 'soiltype'
[Michele Simionato (@micheles)]
- Added support for traditional disaggregation
- Removed the global site parameter
reference_siteclassand turned
backarc,z1pt0andz2ptinto dynamic site parameters - Internal: storing the SiteCollection in a pandas-friendly way
- Added HDF5 exporter/importer for the GMFs
- Replaced XML exposures with CSV exposures in the demos
[Claudia Mascandola (@mascandola)]
- Fix to LanzanoEtAl2016 in presence of a "bas" term in the site model
[Nicolas Schmid (@schmidni)]
- Improve performance for ShakeMap calculations when spatialcorr and crosscorr
are both set to 'no' - Add feature to do ShakeMap calculations for vulnerability models using MMI.
[Michele Simionato (@micheles)]
- Added a flag
ignore_master_seed(false by default) - Estimated the uncertainty on the losses due to the uncertainty in the
vulnerability functions in event_based_risk and scenario_risk calculations - Supported exposures with generic CSV fields thanks to the
exposureFields
mapping - Honored
custom_site_idin the hazard curves and UHS CSV exporters - Added a check for the case of
aValue=-Infin the truncatedGR MFD - Extended the engine to read XML ShakeMaps from arbitrary sources (in
particular local path names and web sites different from the USGS site) - Fixed
readinput.get_rupturesto be able to read ruptures in engine 3.11
format - scenario_risk calculations starting from ruptures in CSV format now
honor the parameter number_of_ground_motion_fields
[Nicolas Schmid (@schmidni)]
- Optimized spatial covariance calculations for ShakeMaps (more than 10x)
- Adjusted logic in cross correlation matrix for ShakeMaps; now calculations
are skipped for corr='no'
[Michele Simionato (@micheles)]
- Added a
cholesky_limitto forbid large Cholesky decompositions in ShakeMap
calculations - Weighted the heavy sources in parallel in event based calculations
- Supported zero coefficient of variations with the beta distribution
- Internal: changed how the agg_loss_table is stored
- Fixed the avg_losses exporter when aggregate_by=id
- Fully merged the calculators scenario_risk, event_based_risk and ebrisk and
ensured independency from the number of tasks even for the "BT" and "PM"
distributions - Storing the agg_loss_table as 64 bit floats instead of 32 bit floats
- Changed the algorithm used to generate the epsilons to avoid storing the
epsilon matrix
Contributors
mmpagani, g-weatherill, and 6 other contributors
Assets 2
OpenQuake Engine 3.11.3
[Michele Simionato (@micheles)]
- Fixed hdf5.dumps that was generating invalid JSON for Windows pathnames,
thus breaking the QGIS plugin on Windows - Fix a bug when reusing a hazard calculation without
aggregate_byfor a
risk calculation withaggregate_by - Fixed the aggregate curves exporter for
aggregate_by=id: it was exporting
b'asset_id' instead of asset_id
OpenQuake Engine 3.11.2
[Matteo Nastasi (@nastasi-oq)]
- Fixed setup.py 'pyproj' dependency
[Antonio Ettorre (@vot4anto)]
- Fixed docker builder
OpenQuake Engine 3.11.1
[Michele Simionato (@micheles)]
- Fixed memory regression in ebrisk calculations
OpenQuake Engine 3.11.0
[Michele Simionato (@micheles)]
- Extended the
collapse_logic_treefeature to scenarios and event based
calculations - Extended the taxonomy mapping feature to multiple loss types
- The error was not stored in the database if the calculation failed
before starting - Made ground_motion_fields=true mandatory in event_based_risk
[Robin Gee (@rcgee)]
- Added a check for missing
soil_intensitiesin classical calculations
with site amplification
[Michele Simionato (@micheles)]
- Documented all the parameters in a job.ini file, and removed some
obsolete ones - Added a CSV exporter for the output
avg_gmf - Fixed reporting in case of
CorrelationButNoInterIntraStdDevserrors - Better error message when the rupture is far away from the sitesa
- Made the calculation report exportable with
--exports rst - The boolean fields
vs30measuredandbackarcwhere not cast correctly
when read from a CSV field (the engine read them always as True) - Extended
oq plotto draw more than 2 plots - Raised an early error for zero probabilities in the hypocenter distribution
or the nodal plane distribution - Extended the autostart zmq distribution logic to celery and dask
- Stored the _poes during the classical phase and not after, to save time
- Implemented a memory-saving logic in the classical calculator based on
thememory.limitparameter in openquake.cfg;
[Richard Styron (@cossatot)]
- Added TaperedGRMFD to hazardlib
[Michele Simionato (@micheles)]
- Fixed a wrong check failing in the case of multi-exposures with multiple
cost types - Removed a check causing a false error "Missing vulnerability function
for taxonomy" - Consequence functions associated to a taxonomy missing in the exposure
are now simply discarded, instead of raising an error - Added a warning when there are zero losses for nonzero GMFs
- Added a command
oq plot avg_gmf?imt=IMT - Internal: stored
avg_gmfas a DataFrame - Honored the
individual_curvesparameter in avg_losses, agg_losses and
and agg_curves (i.e. by default only expose the statistical results) - Refactored the
oq commandsand removed the redundantoq helpsince
there isoq --helpinstead - Support for input URLs associated to an input archive
- Introduced
deformation_componentparameter in the secondary perils - Optimized the storage of the risk model with a speedup of 60x
for a calculation with ~50,000 fragility functions (2 minutes->2seconds)
and a 3x reduction on disk space - Accepted aggregate_by=id in scenario/event based calculations
- Accepted aggregate_by=site_id in scenario/event based calculations
- Removed the generation of asset loss maps from event_based_risk
- Made the "Aggregate Losses" output in scenario_risk consistent with
event_based_risk and scenario_risk and supportedaggregate_by - Perform the disaggregation checks before starting the classical part
- Changed the "Aggregate Loss Curves" CSV exporter to generate a file for
each realization, for consistency with the other exporters - The ebrisk outputs "Total Losses" and "Total Loss Curves" are now included
in the outputs "Aggregate Losses" and "Aggregate Curves" - Introduced an
agg_loss_tabledataset and optimized the generation of
aggregate loss curves (up to 100x speedup) - Removed misleading zero losses in agg_losses.csv
- Fixed
oq recompute_lossesand renamed it tooq reaggregate - Bug fix: ignore_covs=true now sets the coefficient of variations to zero
[Anirudh Rao (@raoanirudh)]
- Improved error handling of bad or zero coefficients of variation
for the Beta distribution for vulnerability
[Michele Simionato (@micheles)]
- Fixed 32 bit rounding issues in scenario_risk: now the total losses and
and the sum of the average losses are much closer - Internal: made the loss type
occupantsa bit less special - Documented
oq to_nrml
[Claudia Mascandola (@mascandola)]
- Added the Lanzano et al. (2019) GMPE
[Michele Simionato (@micheles)]
- Honored
minimum_asset_lossalso in the fully aggregated loss table,
not only in the partially aggregated loss tables and average losses - Bug fixed: the log was disappearing in presence of an unrecognized
variable in the job.ini - Implemented
minimum_asset_lossin scenario_risk for consistency
with theebriskcalculator - Added a command
oq plot gridded_sources? - Fixed
oq recompute_lossesto expose the outputs to the database - Fixed
oq engine --run --paramsthat was not working for
thepointsource_distance - Changed the meaning of the
pointsource_distanceapproximation
[Marco Pagani (@mmpagani), Michele Simionato (@micheles), Thomas Chartier (@tomchartier)]
- Added experimental version of KiteSource and KiteSurface
[Michele Simionato (@micheles)]
- Changed the serialization of ruptures to support MultiSurfaces
- Fixed a small bug of logic in the WebUI: if the authentication is
turned off, everyone must be able to see all calculations - Fixed a bug in the calculation of averages losses in scenario_risk
calculations in presence of sites with zero hazard - Optimized the prefiltering by using a KDTree
- Experimental: implemented gridding of point sources
- Reduced slow tasks due to big complex fault sources
- Moved the parameter
num_coresinto openquake.cfg - Internal: introduced the environment variable OQ_REDUCE
- Using pandas to export the GMF in CSV format
- Internal: required h5py == 2.10.0
- Internal: made the classical ruptures pandas-friendly
- Internal: made the damage distributions pandas-friendly
[Marco Pagani (@mmpagani)]
- Added a new type of undertainty for the seismic source characterisation
logic tree calledTruncatedGRFromSlipAbsolute - Added a get_fault_surface_area method to sources
[Michele Simionato (@micheles)]
- Changed the source seed algorithm in event based calculations
- Added an estimate of the portfolio damage error due to the seed dependency
- Stored the damage distributions in a pandas-friendly way and extended
DataStore.read_dfto accept multi-indices
[Viktor Polak (@viktor76525)]
- Added the Phung et al. (2020) GMPE
[Michele Simionato (@micheles)]
- Implemented
truncGutenbergRichterMFDfrom slip rate and rigidity - Fixed bug when computing the damage distributions per asset and event
- Simplified/optimized the UCERF filtering
[Viktor Polak (@viktor76525)]
- Added the Chao et al. (2020) GMPE
[Michele Simionato (@micheles)]
- Introduced an early memory check in classical calculations
- Reduced the memory occupation in classical calculations
- Implemented AvgPoeGMPE
- Forbidded the usage of
aggregate_byexcept in ebrisk calculations - Added a check on valid branch ID names: only letters, digits and
the characters "#:-_." are accepted - Huge performance improvement for very complex logic trees
- Shortened the logic tree paths when exporting the realizations
[Graeme Weatherill (@g-weatherill)]
- Refactor of the Kotha et al. (2020) GMM and its adjustments for ESHM20
[Michele Simionato (@micheles)]
- Huge speedup in models with src_multiplicity > 1
- Fixed bug in source model logic tree sampling with more than 2 branchsets
- Fixed hazard maps all zeros for individual_curves=true and more than 1 site
- Fixed a bug in
oq prepare_site_modelwhen sites.csv is
the same as the vs30.csv file and there is a grid spacing - Speeding up the preclassical calculator
- Added an entry point /extract/eids_by_gsim for the QGIS plugin
- Internal: automatically convert the source IDs into unique IDs
- Changed scenario calculations to depend on the
ses_seed, not the
random_seed - Added check on the versions of numpy, scipy and pandas between master and
workers - Added a check for large seed dependency in the GMFs and an estimate of the
portfolio error due to the seed dependency
[Viktor Polak (@viktor76525)]
- Added fpeak site parameter
- Added the Hassani and Atkinson (2020) GMPE
[Marco Pagani (@mmpagani)]
- Added a check on DEFINED_FOR_REFERENCE_VELOCITY when using amplification
- Added a method to create a TruncatedGRMFD from a value of scalar seismic
moment - Added a method to the modifiable GMPE to add (or subtract) a delta std
- Added a method to the modifiable GMPE to set the total std as the sum of
tau plus a delta