Open
Description
tests/ip hangs with 100% cpu load
in libmill-git-2dd13ae at make check
$ ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: en: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
3: wl: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc htb state UP group default qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
inet 192.168.2.102/24 brd 192.168.2.255 scope global noprefixroute wlp3s0
valid_lft forever preferred_lft forever
$ sysctl -a -r 'net.ipv6.conf.*.disable_ipv6'
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
net.ipv6.conf.en.disable_ipv6 = 1
net.ipv6.conf.lo.disable_ipv6 = 1
net.ipv6.conf.wl.disable_ipv6 = 1
tc.bash stop did not help [stop traffic shaping]
$ diff ...
-3: wl: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc htb state UP group default qlen 1000
+3: wl: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
me clueless
but at least the tests should be wrapped in timeout -k $sec $sec $cmd
Metadata
Metadata
Assignees
Labels
No labels