Manage your VPN via this module. The vpn_module reports the VPN's status in one of three states: [<location> | Connecting... | No VPN ], where the location is your or public IP address. It also provides the ability to toggle the VPN connection, open a rofi menu with VPN locations to set, and copy your public ip to the clipboard.
The polybar_module_definition file can be appended to your polybar module definitions, adding the vpn module with these preset capabilities:
- left-click: connect and disconnect VPN
- right-click: open rofi menu to select between locations
- middle-click: copy your public IP address to the clipboard
(Note: This gif is from an older version. The polybar theme seen in the gif was modified from polybar-5 provided by Aditya Shakya and originally designed by Benedikt Vollmerhaus)
2022-09-24 Reimplemented favorite VPN location arrays.
- You can once again set favorite VPN locations. Edit the
./mullvad/update_mullvad_relaysscript, and look for the user favorite arrays.
2022-09-23 Overhauled the package...
- Renamed utility from
vpn_module.shto the more modernvpn_module. Several command calls have changed. See the usage section below or runvpn_module help. You can probably just re-clone the package and re-copy the newpolybar_module_definition. The previous version is left under the branchold-master. - Added city level VPN locations! You can now select ANY of mullvad's relays through the rofi menu!
- Replaced all the hard-coded VPN locations and rofi menu scripting with more extensible, dynamic scripting. The script now relies on a the mullvad directory, which contains VPN locations and their relay codes. Notably, the data files in this directory are all updated by running the
update_mullvad_relaysscript. - Removed the favorite VPN array for now.
- Removed the provided font, as it wasn't being used. Please use a Nerd Font if you'd like to match the contained glyphs or otherwise alter the icons for now.
- Added a help menu that comes up when you run
vpn_module helpor the script with no parameters.
polybar-vpn-controller is scripted to facilitate differing VPN's, but compatibility will depend on your VPN's API. The stock settings are intended for use with Mullvad VPN. See the vpn_module script user settings to judge whether this code can easily be adapted for your choice of VPN. It'd be great to make this module more robust for other VPN's, so please contribute other setups. Thanks!
You need a VPN!
mullvad-vpn, available for Arch-baseds systems in the AUR- or another VPN (requires reconfiguring
vpn_module) rofi, while not strictly necessary, is probably going to be wanted by the majority of users.- a nerd font, if you want to use all the contained glyphs
geoipandgeoip-database- provide country info instead of public IP addressgeoip-database-extra- also provides city infoxclip- allows copying ip address to clipboard
The optional dependencies can be found in the Arch Package Repository.
This setup assumes that you use Mullvad, that your polybar configuration is at ~/.config/polybar, and that you are importing module definitions from user_modules.ini. (To setup a VPN other than Mullvad, read the configuration tips in vpn_module. Modify as necessary. Also change the status reporting method in vpn_module to either geoip or some other method. )
cd ~/.config/polybar
git clone https://github.com/shervinsahba/polybar-vpn-controller.git
cd polybar-vpn-controller
./mullvad/update_mullvad_relays
cat polybar_module_definition >> ~/.config/polybar/user_modules.ini
Now add the vpn module to your polybar's config or config.ini.
Run vpn_module help.
Usage: vpn_module <option>
options:
toggle toggles VPN connection
menu opens rofi menu to select VPN location
ip-clip copies ip address to clipboard
status <method> reports back with VPN status and location
methods:
mullvad uses mullvad status to print location
other-vpn uses a generic method to print location
geoip uses the geoip package to print location
ip prints ip address
The Mullvad VPN client may create excessive entries in the system journal because of the way this script calls on it. To suppress these messages in your log, follow these instructions for a distro with systemd. Tested on Manjaro and Arch.