Replies: 1 comment 4 replies
-
|
Please enable debug logging and post a debug log of the device joining. |
Beta Was this translation helpful? Give feedback.
-
|
I'm attaching a full log with the max of debug. Sorry you'll get also the plugin one, hope that do not disturb you much. The error is happening in line 10322 of the attached log (which is from start to end), and where I'm pairing 3 devices. |
Beta Was this translation helpful? Give feedback.
-
|
Here's the relevant transaction: 2025-01-23 20:56:58,193 INFO :[0x066a] Requesting 'Node Descriptor'
2025-01-23 20:56:58,196 DEBUG :Sending packet ZigbeePacket(timestamp=datetime.datetime(2025, 1, 23, 19, 56, 58, 196749, tzinfo=datetime.timezone.utc), priority=<PacketPriority.HIGH: 1>, src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x066A), dst_ep=0, source_route=None, extended_timeout=True, tsn=1, profile_id=0, cluster_id=<ZDOCmd.Node_Desc_req: 0x0002>, data=Serialized[b'\x01j\x06'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
...
2025-01-23 20:56:58,441 DEBUG :Sending packet ZigbeePacket(timestamp=datetime.datetime(2025, 1, 23, 19, 56, 58, 441474, tzinfo=datetime.timezone.utc), priority=0, src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x066A), dst_ep=0, source_route=None, extended_timeout=False, tsn=1, profile_id=0, cluster_id=5, data=Serialized[b'\x01j\x06'], tx_options=<TransmitOptions.ACK: 1>, radius=0, non_member_radius=0, lqi=None, rssi=None)
...
2025-01-23 20:56:58,521 DEBUG :Received a packet: ZigbeePacket(timestamp=datetime.datetime(2025, 1, 23, 19, 56, 58, 520460, tzinfo=datetime.timezone.utc), priority=0, src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x066A), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=0, source_route=None, extended_timeout=False, tsn=65, profile_id=0, cluster_id=32773, data=Serialized[b'\x01\x00j\x06\x02\x01\x02'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=232, rssi=-42)
2025-01-23 20:56:58,605 INFO :[0x066a] Got Node Descriptor: [1, 2]We send ZDO request with ID 0x01. The device responds with response 0x01 but to the wrong cluster ( Are you doing your own endpoint scanning in your application? We log |
Beta Was this translation helpful? Give feedback.
-
|
The device is a Plug from INNR (SP 120). Will investigate more by adding debug on plugin side, to understand more. |
Beta Was this translation helpful? Give feedback.
-
|
Here is a new log, where the Device announcement is at |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
Sometime during pairing process, we see this error message
Beta Was this translation helpful? Give feedback.
All reactions