k3sup is a light-weight utility to get from zero to KUBECONFIG with k3s on any local or remote VM. All you need is ssh access and the k3sup binary to get kubectl access immediately.
The tool is written in Go and is cross-compiled for Linux, Windows, MacOS and even on Raspberry Pi.
How do you say it? Ketchup, as in tomato.
- k3sup 🚀 (said 'ketchup')
- Contents:
- What's this for? 💻
- Do you love
k3sup? - Download
k3sup(tl;dr) - Demo 📼
- Usage ✅
- Pre-requisites for k3sup servers and agents
- 👑 Setup a Kubernetes server with
k3sup - Checking if a cluster is ready
- Merging clusters into your KUBECONFIG
- 😸 Join some agents to your Kubernetes server
- Use your hardware authentication / 2FA or SSH Agent
- K3sup plan for automation
- Create a multi-master (HA) setup with external SQL
- Create a multi-master (HA) setup with embedded etcd
- 👨💻 Micro-tutorial for Raspberry Pi (2, 3, or 4) 🥧
- 👑 Setup a Kubernetes server with
- Caveats on security
- Contributing
- 📢 What are people saying about
k3sup? - Similar tools & glossary
- Troubleshooting and support
This tool uses ssh to install k3s to a remote Linux host. You can also use it to join existing Linux hosts into a k3s cluster as agents. First, k3s is installed using the utility script from Rancher, along with a flag for your host's public IP so that TLS works properly. The kubeconfig file on the server is then fetched and updated so that you can connect from your laptop using kubectl.
You may wonder why a tool like this needs to exist when you can do this sort of thing with bash.
k3sup was developed to automate what can be a very manual and confusing process for many developers, who are already short on time. Once you've provisioned a VM with your favourite tooling, k3sup means you are only 60 seconds away from running kubectl get pods on your own computer. If you are a local computer, you can bypass SSH with k3sup install --local
k3sup was created by Alex Ellis - the founder of OpenFaaS ® & inlets.
Want to see continued development? Sponsor alexellis on GitHub
- Bootstrap Kubernetes with k3s onto any VM with
k3sup install- either manually, during CI or throughcloud-init - Get from zero to
kubectlwithk3son Raspberry Pi (RPi), VMs, AWS EC2, Packet bare-metal, DigitalOcean, Civo, Scaleway, and others - Build a HA, multi-master (server) cluster
- Fetch the KUBECONFIG from an existing
k3scluster - Join nodes into an existing
k3scluster withk3sup join
Conceptual architecture, showing
k3sup running locally against any VM such as AWS EC2 or a VPS such as DigitalOcean.
k3sup is distributed as a static Go binary. You can use the installer on MacOS and Linux, or visit the Releases page to download the executable for Windows.
curl -sLS https://get.k3sup.dev | sh
sudo install k3sup /usr/local/bin/
k3sup --helpWindows users can use k3sup install and k3sup join with a normal "Windows command prompt".
In the demo I install Kubernetes (k3s) onto two separate machines and get my kubeconfig downloaded to my laptop each time in around one minute.
- Ubuntu 18.04 VM created on DigitalOcean with ssh key copied automatically
- Raspberry Pi 4 with my ssh key copied over via
ssh-copy-id
Watch the demo:
The k3sup tool is a client application which you can run on your own computer. It uses SSH to connect to remote servers and creates a local KUBECONFIG file on your disk. Binaries are provided for MacOS, Windows, and Linux (including ARM).
Some Linux hosts are configured to allow sudo to run without having to repeat your password. For those which are not already configured that way, you'll need to make the following changes if you wish to use k3sup:
# sudo visudo
# Then add to the bottom of the file
# replace "alex" with your username i.e. "ubuntu"
alex ALL=(ALL) NOPASSWD: ALLIn most circumstances, cloud images for Ubuntu and other distributions will not require this step.
As an alternative, if you only need a single server you can log in interactively and run k3sup install --local instead of using SSH.
You can setup a server and stop here, or go on to use the join command to add some "agents" aka nodes or workers into the cluster to expand its compute capacity.
Provision a new VM running a compatible operating system such as Ubuntu, Debian, Raspbian, or something else. Make sure that you opt-in to copy your registered SSH keys over to the new VM or host automatically.
Note: You can copy ssh keys to a remote VM with
ssh-copy-id user@IP.
Imagine the IP was 192.168.0.1 and the username was ubuntu, then you would run this:
- Run
k3sup:
export IP=192.168.0.1
k3sup install --ip $IP --user ubuntu
# Or use a hostname and SSH key for EC2
export HOST="ec2-3-250-131-77.eu-west-1.compute.amazonaws.com"
k3sup install --host $HOST --user ubuntu \
--ssh-key $HOME/ec2-key.pemOther options for install:
--cluster- start this server in clustering mode using embedded etcd (embedded HA)--skip-install- if you already have k3s installed, you can just run this command to get thekubeconfig--ssh-key- specify a specific path for the SSH key for remote login--local- Perform a local install without using ssh--local-path- default is./kubeconfig- set the file where you want to save your cluster'skubeconfig. By default this file will be overwritten.--merge- Merge config into existing file instead of overwriting (e.g. to add config to the default kubectl config, use--local-path ~/.kube/config --merge).--context- default isdefault- set the name of the kubeconfig context.--ssh-port- default is22, but you can specify an alternative port i.e.2222--no-extras- disable "servicelb" and "traefik"--k3s-extra-args- Optional extra arguments to pass to k3s installer, wrapped in quotes, i.e.--k3s-extra-args '--disable traefik'or--k3s-extra-args '--docker'. For multiple args combine then within single quotes--k3s-extra-args '--disable traefik --docker'.--k3s-version- set the specific version of k3s, i.e.v1.21.1--k3s-channel- set a specific version of k3s based upon a channel i.e.stable
--ipsec- Enforces the optional extra argument for k3s:--flannel-backendoption:ipsec
--print-command- Prints out the command, sent over SSH to the remote computer--datastore- used to pass a SQL connection-string to the--datastore-endpointflag of k3s. You must use the format required by k3s in the Rancher docs.
See even more install options by running k3sup install --help.
- Now try the access:
export KUBECONFIG=`pwd`/kubeconfig
kubectl get nodeNote that you should always use pwd/ so that a full path is set, and you can change directory if you wish.
There are various ways to confirm whether a cluster is ready to use.
K3sup runs the "kubectl get nodes" command using a KUBECONFIG file, and looks for the "Ready" status on each node, including agents/workers.
Install K3s directly on the node and then check if it's ready:
k3sup install \
--local \
--context localk3s
k3sup ready \
--context localk3s \
--kubeconfig ./kubeconfigCheck a remote server saved to a local file:
k3sup install \
--ip 192.168.0.101 \
--user pi
k3sup ready \
--context default \
--kubeconfig ./kubeconfigCheck a merged context in your default KUBECONFIG:
k3sup install \
--ip 192.168.0.101 \
--user pi \
--context pik3s \
--merge \
--local-path $HOME/.kube/config
# $HOME/.kube/config is a default for kubeconfig
k3sup ready --context pik3sYou can also merge the remote config into your main KUBECONFIG file $HOME/.kube/config, then use kubectl config get-contexts or kubectx to manage it.
The default "context" name for the remote k3s cluster is default, however you can override this as below.
For example:
k3sup install \
--ip $IP \
--user $USER \
--merge \
--local-path $HOME/.kube/config \
--context my-k3sHere we set a context of my-k3s and also merge into our main local KUBECONFIG file, so we could run kubectl config use-context my-k3s or kubectx my-k3s.
Let's say that you have a server, and have already run the following:
export SERVER_IP=192.168.0.100
export USER=root
k3sup install --ip $SERVER_IP --user $USERNext join one or more agents to the cluster:
export AGENT_IP=192.168.0.101
export SERVER_IP=192.168.0.100
export USER=root
k3sup join --ip $AGENT_IP --server-ip $SERVER_IP --user $USERPlease note that if you are using different usernames for SSH'ing to the agent and the server that you must provide the username for the server via the --server-user parameter.
That's all, so with the above command you can have a two-node cluster up and running, whether that's using VMs on-premises, using Raspberry Pis, 64-bit ARM or even cloud VMs on EC2.
You may wish to use the ssh-agent utility if:
- Your SSH key is protected by a password, and you don't want to type it in for each k3sup command
- You use a hardware authentication device key like a Yubico YubiKey to authenticate SSH sessions
Run the following to set SSH_AUTH_SOCK:
$ eval $(ssh-agent)
Agent pid 2641757
Optionally, if your key is encrypted, run: ssh-add ~/.ssh/id_rsa
Now run any k3sup command, and your SSH key will be requested from the ssh-agent instead of from the usual location.
You can also specify an SSH key with --ssh-key if you want to use a specific key-pair.
A new command was added to k3sup to help with automating large amounts of nodes.
k3sup plan reads a JSON input file containing hosts, and will generate an installation command for a number of servers and agents.
Example input file:
[
{
"hostname": "node-a-1",
"ip": "192.168.129.138"
},
{
"hostname": "node-a-2",
"ip": "192.168.129.128"
},
{
"hostname": "node-a-3",
"ip": "192.168.129.131"
},
{
"hostname": "node-a-4",
"ip": "192.168.129.130"
},
{
"hostname": "node-a-5",
"ip": "
8000
192.168.129.127"
}
]The following will create 1x primary server, with 2x additional servers within a HA etcd cluster, the last two nodes will be added as agents:
k3sup plan \
devices.json \
--user ubuntu \
--servers 3 \
--server-k3s-extra-args "--disable traefik" \
--background > bootstrap.shThen make the file executable and run it:
chmod +x bootstrap.sh
./bootstrap.shWatch a demo with dozens of Firecracker VMs: Testing Kubernetes at Scale with bare-metal
The initial version of k3sup plan has a reduced set of flags. Flags such as --k3s-version and --datastore are not available, but feel free to propose an issue with what you need.
The easiest way to test out k3s' multi-master (HA) mode with external storage, is to set up a Mysql server using DigitalOcean's managed service.
- Get the connection string from your DigitalOcean dashboard, and adapt it
Before:
mysql://doadmin:80624d3936dfc8d2e80593@db-mysql-lon1-90578-do-user-6456202-0.a.db.ondigitalocean.com:25060/defaultdb?ssl-mode=REQUIRED
After:
mysql://doadmin:80624d3936dfc8d2e80593@tcp(db-mysql-lon1-90578-do-user-6456202-0.a.db.ondigitalocean.com:25060)/defaultdb
Note that we've removed ?ssl-mode=REQUIRED and wrapped the host/port in tcp().
export DATASTORE="mysql://doadmin:80624d3936dfc8d2e80593@tcp(db-mysql-lon1-90578-do-user-6456202-0.a.db.ondigitalocean.com:25060)/defaultdbYou can prefix this command with two spaces, to prevent it being cached in your bash history.
Generate a token used to encrypt data (If you already have a running node this can be retrieved by logging into a running node and looking in /var/lib/rancher/k3s/server/token)
# Best option for a token:
export TOKEN=$(openssl rand -base64 64)
# Fallback for no openssl, on a Linux host:
export TOKEN=$(tr -dc A-Za-z0-9 </dev/urandom | head -c 64)
# Failing that, then try:
export TOKEN=$(head -c 64 /dev/urandom|shasum| cut -d - -f 1)- Create three VMs
Imagine we have the following three VMs, two will be servers, and one will be an agent.
export SERVER1=104.248.135.109
export SERVER2=104.248.25.221
export AGENT1=104.248.137.25- Install the first server
k3sup install --user root --ip $SERVER1 --datastore="${DATASTORE}" --token=${TOKEN}- Install the second server
k3sup install --user root --ip $SERVER2 --datastore="${DATASTORE}" --token=${TOKEN}- Join the first agent
You can join the agent to either server, the datastore is not required for this step.
k3sup join --user root --server-ip $SERVER1 --ip $AGENT1Please note that if you are using different usernames for SSH'ing to the agent and the server that you must provide the username for the server via the --server-user parameter.
- Additional steps
If you run kubectl get node, you'll now see two masters/servers and one agent, however, we joined the agent to the first server. If the first server goes down, the agent will effectively also go offline.
kubectl get node
NAME STATUS ROLES AGE VERSION
k3sup-1 Ready master 73s v1.19.6+k3s1
k3sup-2 Ready master 2m31s v1.19.6+k3s1
k3sup-3 Ready <none> 14s v1.19.6+k3s1There are two ways to prevent a dependency on the IP address of any one host. The first is to create a TCP load-balancer in the cloud of your choice, the second is for you to create a DNS round-robbin record, which contains all of the IPs of your servers.
In your DigitalOcean dashboard, go to the Networking menu and click "Load Balancer", create one in the same region as your Droplets and SQL server. Select your two Droplets, i.e. 104.248.34.61 and 142.93.175.203, and use TCP with port 6443.
If you want to run k3sup join against the IP of the LB, then you should also add TCP port 22
Make sure that the health-check setting is also set to TCP and port 6443. Wait to get your IP, mine was: 174.138.101.83
Save the LB into an environment variable:
export LB=174.138.101.83Now use ssh to log into both of your servers, and edit their config files at /etc/systemd/system/k3s.service, update the lines --tls-san and the following address, to that of your LB:
ExecStart=/usr/local/bin/k3s \
server \
'--tls-san' \
'104.248.135.109' \
Becomes:
ExecStart=/usr/local/bin/k3s \
server \
'--tls-san' \
'174.138.101.83' \
Now run:
sudo systemctl daemon-reload && \
sudo systemctl restart k3s-agentAnd repeat these steps on the other server.
You can update the agent manually, via ssh and edit /etc/systemd/system/k3s-agent.service.env on the host, or use k3sup join again, but only if you added port 22 to your LB:
k3sup join --user root --server-ip $LB --ip $AGENT1Finally, regenerate your KUBECONFIG file with the LB's IP, instead of one of the servers:
k3sup install --skip-install --ip $LBLog into the first server, and stop k3s sudo systemctl stop k3s, then check that kubectl still functions as expected:
export KUBECONFIG=`pwd`/kubeconfig
kubectl get node -o wide
NAME STATUS ROLES AGE VERSION
k3sup-1 NotReady master 23m v1.19.6+k3s1
k3sup-2 Ready master 25m v1.19.6+k3s1
k3sup-3 Ready <none> 22m v1.19.6+k3s1You've just simulated a failure of one of your masters/servers, and you can still access kubectl. Congratulations on building a resilient k3s cluster.
In k3s v1.19.5+k3s1 a HA multi-master (multi-server in k3s terminology) configuration is available called "embedded etcd". A quorum of servers will be required, which means having an odd number of nodes and least three. See more
- Initialize the cluster with the first server
Note the --cluster flag
export SERVER_IP=192.168.0.100
export USER=root
k3sup install \
--ip $SERVER_IP \
--user $USER \
--cluster \
--k3s-version v1.19.1+k3s1- Join each additional server
Note the new
--serverflag
export USER=root
export SERVER_IP=192.168.0.100
export NEXT_SERVER_IP=192.168.0.101
k3sup join \
--ip $NEXT_SERVER_IP \
--user $USER \
--server-user $USER \
--server-ip $SERVER_IP \
--server \
--k3s-version v1.19.1+k3s1Now check kubectl get node:
kubectl get node
NAME STATUS ROLES AGE VERSION
paprika-gregory Ready master 8m27s v1.19.2-k3s
cave-sensor Ready master 27m v1.19.2-k3sIf you used --no-extras on the initial installation you will also need to provide it on each join:
export USER=root
export SERVER_IP=192.168.0.100
export NEXT_SERVER_IP=192.168.0.101
k3sup join \
--ip $NEXT_SERVER_IP \
--user $USER \
--server-user $USER \
--server-ip $SERVER_IP \
--server \
--no-extras \
--k3s-version v1.19.1+k3s1In a few moments you will have Kubernetes up and running on your Raspberry Pi 2, 3 or 4. Stand by for the fastest possible install. At the end you will have a KUBECONFIG file on your local computer that you can use to access your cluster remotely.
Conceptual architecture, showing
k3sup running locally against bare-metal ARM devices.
-
Download etcher.io for your OS
-
Flash an SD card using Raspbian Lite
-
Enable SSH by creating an empty file named
sshin the boot partition -
Generate an ssh-key if you don't already have one with
ssh-keygen(hit enter to all questions) -
Find the RPi IP with
ping -c raspberrypi.local, then setexport SERVER_IP=""with the IP -
Enable container features in the kernel, by editing
/boot/cmdline.txt(or/boot/firmware/cmdline.txton Ubuntu) -
Add the following to the end of the line:
cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory -
Copy over your ssh key with:
ssh-copy-id pi@raspberrypi.local -
Run
k3sup install --ip $SERVER_IP --user pi -
Point at the config file and get the status of the node:
export KUBECONFIG=`pwd`/kubeconfig
kubectl get node -o wideYou now have kubectl access from your laptop to your Raspberry Pi running k3s.
If you want to join some nodes, run export IP="" for each additional RPi, followed by:
k3sup join --ip $IP --server-ip $SERVER_IP --user pi
Remember all these commands are run from your computer, not the RPi.
Now where next? I would recommend my detailed tutorial where I spend time looking at how to flash the SD card, deploy k3s, deploy OpenFaaS (for some useful microservices), and then get incoming HTTP traffic.
Try it now: Will it cluster? K3s on Raspbian
If you are using public cloud, then make sure you see the notes from the Rancher team on setting up a Firewall or Security Group.
k3s docs: k3s configuration / open ports
Blogs posts, tutorials, and Tweets about k3sup (#k3sup) are appreciated. Please send a PR to the README.md file to add yours.
Before contributing code, please see the CONTRIBUTING guide. Note that k3sup uses the same guide arkade
Both Issues and PRs have their own templates. Please fill out the whole template.
All commits must be signed-off as part of the Developer Certificate of Origin (DCO)
MIT
-
Five years of Raspberry Pi clusters - raspberrypi.org
-
Multi-master HA Kubernetes in < 5 minutes by Alex Ellis
-
Building a Kubernetes cluster on Raspberry Pi running Ubuntu server by Jakub Czapliński
-
Multi-node Kubernetes on Civo in 5 minutes flat with k3sup! - Civo Learn guide
-
Zero to k3s Kubeconfig in seconds on AWS EC2 with k3sup by Saiyam Pathak
-
k3sup mentioned on Kubernetes Podcast episode 67 by Craig Box & Adam Glick
-
Scheduling Kubernetes workloads to Raspberry Pi using Inlets and Crossplane by Daniel Mangum
- Also checkout the live demo
-
Blog post by Ruan Bekker:
Provision k3s to all the places with a awesome utility called "k3sup" by @alexellisuk. Definitely worth checking it out, its epic!
-
Dave Cadwallader (@geek_dave):
Alex - Thanks so much for all the effort you put into your tools and tutorials. My rpi homelab has been a valuable learning playground for CNCF tech thanks to you!
-
Trying tiny k3s on Google Cloud with k3sup by Stark & Wayne
-
Setting up a Raspberry Pi Kubernetes Cluster with Blinkt! Strips that Show Number of Pods per Node
-
From Zero to Kubernetes Dashboard within Minutes with k3sup and Kontena Lens - by Lauri Nevala
-
BYOK - Build your Own Kubernetes Cluster with Raspberry Pis, k3s, and k3sup by Michael Irwin
-
Run Kubernetes On Your Machine with k3sup by Luc Juggery
-
Trying out k3sup by Geert Baeke
-
Creating your first Kubernetes cluster with k3sup by Daniel Persson
-
My 2019 In Review - Hello Open Source by Alistair Hey
-
Kubernetes 104: Create a 2-node k3s cluster with k3sup by Ahmed Abelsamad
-
My home Kubernetes cluster driven by GitOps and k3sup - by Devin Buhl
-
Raspberry Pi: From 0 to k3s cluster in 5 min with k3sup and Ansible - by Pablo Caderno
-
Kubernetes: from Zero to Hero with Kompose, Minikube, k3sup and Helm by Leon Klingele, Alexander Merker & Florian Wintel
-
Deploying a highly-available K3s with k3sup by Dmitriy Akulov
-
Multi-master HA Kubernetes using K3Sup on Windows10/Server 2019 by Aaron Holt
-
Ansible Role: k3sup by Ivan Vandot
-
HashiCorp Vault on K3s on RPi4 by Colin McCarthy
-
Raspberry Pi Cluster Part 2: ToDo API running on Kubernetes with k3s by Dino Fizzotti
-
Cloud Native Tools for Developers Webinar Recap by Alex Ellis & Alistair Hey
-
Unobtrusive local development with kubernetes, k3s, traefik2 by Vyacheslav
-
Cómo desplegar un clúster de Kubernetes en 60 segundos con k3sup by Ignacio Van Droogenbroeck
-
Raspberry Kubernetes cluster for my homlab with k3sup by Nicola Ballotta
-
k3sup On MacOS Catalina by John Doyle
-
Provision k3s on Google Cloud with Terraform and k3sup — Nimble by Carlos Herrera
-
K3s: Edge Kubernetes by James Governor
-
Creating a k3s Cluster with k3sup & Multipass 💻☸️ by Tom Watt
-
How I’ve set up my highly-available Kubernetes cluster by JJ Macalinao
-
Creating a K3S Raspberry PI Cluster with K3Sup to fire up nightscout with MongoDB
-
Kubernetes Cluster with Rancher on Windows using K3s by Adyanth H
Checkout the Announcement tweet
Glossary:
- Kubernetes: master/slave
- k3s: server/agent
Related tools:
- k3s - Kubernetes as installed by
k3sup. k3s is a compliant, light-weight, multi-architecture distribution of Kubernetes. It can be used to run Kubernetes locally or remotely for development, or in edge locations. - k3d - this tool runs a Docker container on your local laptop with k3s inside
- kind - kind can run a Kubernetes cluster within a Docker container for local development. k3s is also suitable for this purpose through
k3d. KinD is not suitable for running a remote cluster for development. - kubeadm - a tool to create fully-loaded, production-ready Kubernetes clusters with or without high-availability (HA). Tends to be heavier-weight and slower than k3s. It is aimed at cloud VMs or bare-metal computers which means it doesn't always work well with low-powered ARM devices.
- k3v - "virtual kubernetes" - a very early PoC from the author of k3s aiming to slice up a single cluster for multiple tenants
- k3sup-multipass - a helper to launch single node k3s cluster with one command using a multipass VM and optionally proxy the ingress to localhost for easier development.
If you're having issues, it's likely that this is a problem with K3s, and not with k3sup. How do we know that? K3sup is a very mature project and has a few use-cases that it generally performs very well.
Rancher provides support for K3s on their Slack in the #k3s channel. This should be your first port of call. Your second port of call is to raise an issue with the K3s maintainers in the K3s repo
Do you want to install a specific version of K3s? See k3sup install --help and the --k3s-version and --k3s-channel flags.
Is your system ready to run Kubernetes? K3s requires certain Kernel modules to be available, run k3s check-config and check the output. Alex tests K3sup with Raspberry Pi OS and Ubuntu LTS on a regular basis.
The most common problem is that you missed a step, fortunately it's relatively easy to get the logs from the K3s service and it should tell you what's wrong.
-
For the Raspberry Pi you probably haven't updated
cmdline.txtto enable cgroups for CPU and memory. Update it as per the instructions in this file. -
You ran
kubectlon a node. Don't do this. k3sup copies the file to your local workstation. Don't log into agents or servers other than to check logs / upgrade the system. -
sudo: a terminal is required to read the password- setup password-lesssudoon your hosts, see also:Pre-requisites for k3sup agents and servers -
You want to install directly on a server, without using SSH. See also:
k3sup install --localwhich doesn't use SSH, but executes the commands directly on a host. -
K3s server didn't start. Log in and run
sudo systemctl status k3sorsudo journalctl -u k3sto see the logs for the service. -
The K3s agent didn't start. Log in and run
sudo systemctl status k3s-agent -
You tried to remove and re-add a server in an etcd cluster and it failed. This is a known issue, see the K3s issue tracker.
-
You tried to use an unsupported version of a database for HA. See this list from Rancher
-
Your tried to join a node to the cluster and got an error "ssh: handshake failed". This is probably one of three possibilities:
- You did not run
ssh-copy-id. Try to run it and check if you can log in to the server and the new node without a password prompt using regularssh. - You have an RSA public key. There is an underlying issue in a Go library which is referred here. Please provide the additional parameter
--ssh-key ~/.ssh/id_rsa(or wherever your private key lives) until the issue is resolved. - You are using different usernames for SSH'ing to the server and the node to be added. In that case, playe provide the username for the server via the
--server-userparameter.
- You did not run
-
Your
.ssh/configfile isn't being used by K3sup. K3sup does not use the config file used by thesshcommand-line, but instead uses CLI flags, runk3sup install/join --helpto learn which are supported.
Note: Passing
--no-deployto--k3s-extra-argswas deprecated by the K3s installer in K3s 1.17. Use--disableinstead or--no-extras.
You may have run into an issue where sudo access is required for kubectl access.
You should not run kubectl on your server or agent nodes. k3sup is designed to rewrite and/or merge your cluster's config to your local KUBECONFIG file. You should run kubectl on your laptop / client machine.
If you've lost your kubeconfig, you can use k3sup install --skip-install. See also the various flags for merging and setting a context name.
Warning: issues requesting support for smart cards / 2FA will be closed immediately. The feature has been proven to work, and is provided as-is.
You can use a smart card or 2FA security key such as a Yubikey. You must have your ssh-agent configured correctly, at that point k3sup will defer to the agent to make connections on MacOS and Linux. Find out more
Note added by Eduardo Minguez Perez
Currently there is an issue in k3s involving iptables >= 1.8 that can affect the network communication. See the k3s issue and the corresponding kubernetes one for more information and workarounds. The issue has been observed in Debian Buster but it can affect other distributions as well.