Spring is a Rails application preloader. It speeds up development by keeping your application running in the background so you don't need to boot it every time you run a test, rake task or migration.
- Totally automatic; no need to explicitly start and stop the background process
- Reloads your application code on each run
- Restarts your application when configs / initializers / gem dependencies are changed
- Ruby versions: MRI 1.9.3, MRI 2.0, MRI 2.1, MRI 2.2
- Rails versions: 4.2, 5.0 (Spring is installed by default when you do
rails newto generate your application)
Spring makes extensive use of Process.fork, so won't be able to
provide a speed up on platforms which don't support forking (Windows, JRuby).
Add spring to your Gemfile:
gem "spring", group: :development(Note: using gem "spring", git: "..." won't work and is not a
supported way of using spring.)
It's recommended to 'springify' the executables in your bin/
directory:
$ bundle install
$ bundle exec spring binstub --all
This generates a bin/spring executable, and inserts a small snippet of
code into relevant existing executables. The snippet looks like this:
begin
load File.expand_path('../spring', __FILE__)
rescue LoadError
endOn platforms where spring is installed and supported, this snippet hooks spring into the execution of commands. In other cases, the snippet will just be silently ignored and the lines after it will be executed as normal.
If you don't want to prefix every command you type with bin/, you
can use direnv to
automatically add ./bin to your PATH when you cd into your application.
Simply create an .envrc file with the command PATH_add bin in your
Rails directory.
For this walkthrough I've generated a new Rails application, and run
rails generate scaffold post name:string.
Let's run a test:
$ time bin/rake test test/controllers/posts_controller_test.rb
Running via Spring preloader in process 2734
Run options:
# Running tests:
.......
Finished tests in 0.127245s, 55.0121 tests/s, 78.5887 assertions/s.
7 tests, 10 assertions, 0 failures, 0 errors, 0 skips
real 0m2.165s
user 0m0.281s
sys 0m0.066s
That wasn't particularly fast because it was the first run, so spring had to boot the application. It's now running:
$ bin/spring status
Spring is running:
26150 spring server | spring-demo-app | started 3 secs ago
26155 spring app | spring-demo-app | started 3 secs ago | test mode
The next run is faster:
$ time bin/rake test test/controllers/posts_controller_test.rb
Running via Spring preloader in process 8352
Run options:
# Running tests:
.......
Finished tests in 0.176896s, 39.5714 tests/s, 56.5305 assertions/s.
7 tests, 10 assertions, 0 failures, 0 errors, 0 skips
real 0m0.610s
user 0m0.276s
sys 0m0.059s
If we edit any of the application files, or test files, the changes will be picked up on the next run without the background process having to restart. This works in exactly the same way as the code reloading which allows you to refresh your browser and instantly see changes during development.
But if we edit any of the files which were used to start the application (configs, initializers, your gemfile), the application needs to be fully restarted. This happens automatically.
Let's "edit" config/application.rb:
$ touch config/application.rb
$ bin/spring status
Spring is running:
26150 spring server | spring-demo-app | started 36 secs ago
26556 spring app | spring-demo-app | started 1 sec ago | test mode
The application detected that config/application.rb changed and
automatically restarted itself.
If we run a command that uses a different environment, then that environment gets booted up:
$ bin/rake routes
Running via Spring preloader in process 2363
posts GET /posts(.:format) posts#index
POST /posts(.:format) posts#create
new_post GET /posts/new(.:format) posts#new
edit_post GET /posts/:id/edit(.:format) posts#edit
post GET /posts/:id(.:format) posts#show
PUT /posts/:id(.:format) posts#update
DELETE /posts/:id(.:format) posts#destroy
$ bin/spring status
Spring is running:
26150 spring server | spring-demo-app | started 1 min ago
26556 spring app | spring-demo-app | started 42 secs ago | test mode
26707 spring app | spring-demo-app | started 2 secs ago | development mode
There's no need to "shut down" spring. This will happen automatically
when you close your terminal. However if you do want to do a manual shut
down, use the stop command:
$ bin/spring stop
Spring stopped.
To remove spring:
- 'Unspring' your bin/ executables:
bin/spring binstub --remove --all - Remove spring from your Gemfile
You must not install Spring on your production environment. To prevent it from
being installed, provide the --without development test argument to the
bundle install command which is used to install gems on your production
machines:
$ bundle install --without development test
Runs a rake task. Rake tasks run in the development environment by
default. You can change this on the fly by using the RAILS_ENV
environment variable. The environment is also configurable with the
Spring::Commands::Rake.environment_matchers hash. This has sensible
defaults, but if you need to match a specific task to a specific
environment, you'd do it like this:
Spring::Commands::Rake.environment_matchers["perf_test"] = "test"
Spring::Commands::Rake.environment_matchers[/^perf/] = "test"
# To change the environment when you run `rake` with no arguments
Spring::Commands::Rake.environment_matchers[:default] = "development"These execute the rails command you already know and love. If you run
a different sub command (e.g. rails server) then spring will automatically
pass it through to the underlying rails executable (without the
speed-up).
You can add these to your Gemfile for additional commands:
- spring-commands-rspec
- spring-commands-cucumber
- spring-commands-spinach
- spring-commands-testunit - useful for
running
Test::Unittests on Rails 3, since only Rails 4 allows you to userake test path/to/testto run a particular test/directory. - spring-commands-teaspoon
- spring-commands-m
- spring-commands-rubocop
If you don't want spring-related code checked into your source repository, it's possible to use spring without adding to your Gemfile. However, using spring binstubs without adding spring to the Gemfile is not supported.
To use spring like this, do a gem install spring and then prefix
commands with spring. For example, rather than running bin/rake -T,
you'd run spring rake -T.
If you're using Spring binstubs, but temporarily don't want commands to
run through Spring, set the DISABLE_SPRING environment variable.
Spring uses Rails' class reloading mechanism
(ActiveSupport::Dependencies) to keep your code up to date between
test runs. This is the same mechanism which allows you to see changes
during development when you refresh the page. However, you may never
have used this mechanism with your test environment before, and this
can cause problems.
It's important to realise that code reloading means that the constants in your application are different objects after files have changed:
$ bin/rails runner 'puts User.object_id'
70127987886040
$ touch app/models/user.rb
$ bin/rails runner 'puts User.object_id'
70127976764620
Suppose you have an initializer config/initializers/save_user_class.rb
like so:
USER_CLASS = UserThis saves off the first version of the User class, which will not
be the same object as User after the code has been reloaded:
$ bin/rails runner 'puts User == USER_CLASS'
true
$ touch app/models/user.rb
$ bin/rails runner 'puts User == USER_CLASS'
false
So to avoid this problem, don't save off references to application constants in your initialization code.
As of Spring 1.7, there is some support for doing this. See this example repository for information about how to do it with Docker.
Spring will read ~/.spring.rb and config/spring.rb for custom
settings. Note that ~/.spring.rb is loaded before bundler, but
config/spring.rb is loaded after bundler. So if you have any
spring-commands-* gems installed that you want to be available in all
projects without having to be added to the project's Gemfile, require
them in your ~/.spring.rb.
config/spring_client.rb is also loaded before bundler and before a
server process is started, it can be used to add new top-level commands.
Spring must know how to find your Rails application. If you have a normal app everything works out of the box. If you are working on a project with a special setup (an engine for example), you must tell Spring where your app is located:
Spring.application_root = './test/dummy'There is no Spring.before_fork callback. To run something before the
fork, you can place it in ~/.spring.rb or config/spring.rb or in any of the files
which get run when your application initializes, such as
config/application.rb, config/environments/*.rb or
config/initializers/*.rb.
You might want to run code after Spring forked off the process but
before the actual command is run. You might want to use an
after_fork callback if you have to connect to an external service,
do some general cleanup or set up dynamic configuration.
Spring.after_fork do
# run arbitrary code
endIf you want to register multiple callbacks you can simply call
Spring.after_fork multiple times with different blocks.
Spring will automatically detect file changes to any file loaded when the server boots. Changes will cause the affected environments to be restarted.
If there are additional files or directories which should trigger an
application restart, you can specify them with Spring.watch:
Spring.watch "config/some_config_file.yml"By default Spring polls the filesystem for changes once every 0.2 seconds. This method requires zero configuration, but if you find that it's using too much CPU, then you can use event-based file system listening by installing the spring-watcher-listen gem.
To disable the "Running via Spring preloader" message which is shown each time a command runs:
Spring.quiet = trueThe following environment variables are used by Spring:
DISABLE_SPRING- If set, Spring will be bypassed and your application will boot in a foreground processSPRING_LOG- The path to a file which Spring will write log messages to.SPRING_TMP_PATH- The directory where Spring should write its temporary files (a pidfile and a socket). By default we use theXDG_RUNTIME_DIRenvironment variable, or elseDir.tmpdir, and then create a directory in that namedspring-$UID. We don't use your Rails application'stmp/directory because that may be on a filesystem which doesn't support UNIX sockets.SPRING_APPLICATION_ID- Used to identify distinct Rails applications. By default it is an MD5 hash of the currentRUBY_VERSION, and the path to your Rails project root.SPRING_SOCKET- The path which should be used for the UNIX socket which Spring uses to communicate with the long-running Spring server process. By default this isSPRING_TMP_PATH/SPRING_APPLICATION_ID.SPRING_PIDFILE- The path which should be used to store the pid of the long-running Spring server process. By default this is related to the socket path; if the socket path is/foo/bar/spring.sockthe pidfile will be/foo/bar/spring.pid.SPRING_SERVER_COMMAND- The command to run to start up the spring server when it is not already running. Defaults tospring _[version]_ server --background.
If you want to get more information about what spring is doing, you can run spring explicitly in a separate terminal:
$ spring server
Logging output will be printed to stdout. You can also send log output
to a file with the SPRING_LOG environment variable.