Tags: Ultimaker/CuraEngine
Tags
Print only done any extruders > 0 should still set extruder, ... even if it's the only one. (So for instance if a model is sliced to only use extruder 1, the printer should still switch away from the default extruder 0 one at least --and likely at most-- once.) CURA-12525
Print only done any extruders > 0 should still set extruder, ... even if it's the only one. (So for instance if a model is sliced to only use extruder 1, the printer should still switch away from the default extruder 0 one at least --and likely at most-- once.) CURA-12525
Print only done any extruders > 0 should still set extruder, ... even if it's the only one. (So for instance if a model is sliced to only use extruder 1, the printer should still switch away from the default extruder 0 one at least --and likely at most-- once.) CURA-12525
Print only done any extruders > 0 should still set extruder, ... even if it's the only one. (So for instance if a model is sliced to only use extruder 1, the printer should still switch away from the default extruder 0 one at least --and likely at most-- once.) CURA-12525
Print only done any extruders > 0 should still set extruder, ... even if it's the only one. (So for instance if a model is sliced to only use extruder 1, the printer should still switch away from the default extruder 0 one at least --and likely at most-- once.) CURA-12525
Print only done any extruders > 0 should still set extruder, ... even if it's the only one. (So for instance if a model is sliced to only use extruder 1, the printer should still switch away from the default extruder 0 one at least --and likely at most-- once.) CURA-12525
Print only done any extruders > 0 should still set extruder, ... even if it's the only one. (So for instance if a model is sliced to only use extruder 1, the printer should still switch away from the default extruder 0 one at least --and likely at most-- once.) CURA-12525
PreviousNext