This overlay is intended to enable building the XLibre Xserver project on Gentoo Linux.
Use eselect-repository:
# eselect repository add xlibre git https://github.com/X11Libre/ports-gentoo
You may want to adjust the priority of the xlibre repository in /etc/portage/repos.conf like so:
[xlibre]
...
priority = 100
...
Now you can use emerge --sync xlibre or emaint sync -r xlibre to sync this
repository.
The x11-base/xlibre-server package in this overlay causes file collisions with the
x11-base/xorg-server::gentoo package. When switching to this overlay first fetch
the XLibre Server package and then remove the X.Org Server and drivers packages before
installing x11-base/xlibre-server and the x11-base/xorg-server::xlibre dummy package:
# emerge -f x11-base/xlibre-server
# emerge -C x11-base/xorg-server
# emerge -C x11-base/xorg-drivers
# emerge -av1 x11-base/xlibre-server
# emerge @x11-module-rebuild
# emerge @preserved-rebuild
Right now there is no released version of XLibre Xserver. To use the XLibre live ebuilds, add the following lines to your /etc/portage/package.accept_keywords file:
*/*::xlibre **
Or for the individual packages:
x11-base/xlibre-drivers **
x11-base/xlibre-server **
x11-base/xorg-server **
x11-drivers/xf86-input-elographics **
x11-drivers/xf86-input-evdev **
x11-drivers/xf86-input-joystick **
x11-drivers/xf86-input-libinput **
x11-drivers/xf86-input-synaptics **
x11-drivers/xf86-input-void **
x11-drivers/xf86-input-vmmouse **
x11-drivers/xf86-input-wacom **
x11-drivers/xf86-video-amdgpu **
x11-drivers/xf86-video-ast **
x11-drivers/xf86-video-ati **
x11-drivers/xf86-video-dummy **
x11-drivers/xf86-video-fbdev **
x11-drivers/xf86-video-geode **
x11-drivers/xf86-video-intel **
x11-drivers/xf86-video-mga **
x11-drivers/xf86-video-nouveau **
x11-drivers/xf86-video-qxl **
x11-drivers/xf86-video-r128 **
x11-drivers/xf86-video-siliconmotion **
x11-drivers/xf86-video-vesa **
x11-drivers/xf86-video-vmware **
If /etc/portage/package.accept_keywords is a directory, then create a file like /etc/portage/package.accept_keywords/xlibre containing one of the above blocks.
WARNING: The live ebuilds may break at any time. Use them only if you want to develop or alpha test XLibre. If in doubt, wait for the first release.
There are some older X drivers which are not packaged in Gentoo anymore and so they aren't packaged here as well as we started with the Gentoo packages.
These packages are:
- xf86-input-keyboard
- xf86-input-mouse
- xf86-video-apm
- xf86-video-ark
- xf86-video-chips
- xf86-video-cirrus
- xf86-video-freedreno
- xf86-video-i128
- xf86-video-i740
- xf86-video-mach64
- xf86-video-neomagic
- xf86-video-nested
- xf86-video-nv
- xf86-video-omap
- xf86-video-rendition
- xf86-video-s3virge
- xf86-video-savage
- xf86-video-sis
- xf86-video-sisusb
- xf86-video-suncg14
- xf86-video-suncg3
- xf86-video-suncg6
- xf86-video-sunffb
- xf86-video-sunleo
- xf86-video-suntcx
- xf86-video-tdfx
- xf86-video-trident
- xf86-video-v4l
- xf86-video-vbox
- xf86-video-voodoo
- xf86-video-wsfb
- xf86-video-xgi
For xf86-input-keyboard there is already a pull request to bring back the Linux support. For xf86-input-mouse there is another one too.
If you are using any hardware that requires one of the above drivers then don't hesitate and open an issue. We will see what we can do.
To build pull requests from third-party repositories using the Git live ebuilds you can override the Git repo, branch and commit values set in the ebuild. Just provide one or more of the following variables on the command line:
EGIT_OVERRIDE_REPO_*
EGIT_OVERRIDE_BRANCH_*
EGIT_OVERRIDE_COMMIT_*
For example:
EGIT_OVERRIDE_REPO_X11LIBRE_XSERVER="https://github.com/probonopd/xserver" EGIT_OVERRIDE_BRANCH_X11LIBRE_XSERVER="patch-2" emerge -1 x11-base/xlibre-server
where in this example X11LIBRE is the capitalized name of the Github project and XSERVER is the capitalized name of the Github repository of the live ebuild.
You will see the actual names of the variables specific to each ebuild when you unpack it, e.g.:
# ebuild xlibre-server-9999.ebuild unpack
For further reference of the override mechanism see the git-r3.eclass and its implementation.
If you like to use XLibre with udev support but stay away from eudev/systemd you may want to consider libudev-zero. There are ebuilds for it at sys-libs/libudev-zero - Gentoo Portage Overlays.