X-SCARA is a project that intends to bring the SCARA mechanical model to the world of open-source 3D printing machines, with the same functionality and ease of use as the other popular mechanical models (e.g.: Cartesian, CoreXY, Delta).
Building, configuring and calibrating the X-SCARA machine must be painless.
That is our goal!
Updates:
- X-SCARA hardware is now at revision 5!
- Added test-part accessory to calibrate your printer before you start printing X-SCARA
- Added heated bed support directly connected to the X-SCARA frame
The hardware section will contain everything you need to build X-SCARA, from the B.O.M. to STL files and detailed assembly instructions.
Check the hardware section here and if you want to check for updates and/or new accessories take a look at the changelog.
Updates:
- X-SCARA firmware version is now 0.4 BETA!
- All basic functionality (homing, bed-leveling, tuning segmented movements) implemented & working
- Added coordinate transformation modes to support bed-leveling (`M360 M2` - probe mode)
- Implemented homing sequence `G28`
- Modified UBL (Unified Bed Leveling) to support **X-SCARA**'s kinematic model
- Integrated bed-leveling support `G29`
- Applying bed leveling for planar moves when bed-leveling is activated
- Modified `M665` for configuring machine's settings
- EEPROM support to save most important configuration options
For firmware build and configuration follow these instructions.
if you are already using it check the changelog for any updates.
Read here more about you can calibrate X-SCARA and start printing.
Author and maintainer of this project is Alex Mircescu.
X-SCARA parts and assembly were fully designed in Autodesk Fusion 360.