HS-Link is cmsis-dap v2.0 firmware on CH32V307VCT6, support USB 2.0 High speed(480M) winusb bulk, Max SWD clock about 24Mhz
You can build firmware from source, open HS-LINK.wvproj project with MounRiver and build all,then download into your probe board or you can use my hex file [obj/HS-LINK.hex], download it with WCHISPTool to your probe board
-
Connect HS-LINK to your board
(HS-LINK)PA0 ---------> (your arm board)SWCLK (HS-LINK)PA1 <--------> (your arm board)SWDIO (HS-LINK)PA2 ---------> (your arm board)nSRST(option) -
Plugin HS-LINK to pc USB 2.0 port
-
Open your arm project with MDK
-
Select your arm project target debugger as HS-LINK CMSIS-DAP in target options dialog select Port is SW, select max clock you want (MDK cannot choose max clock 24M,
The 5K effect is 24M) -
Ctrl+F5 or Click Start Debug Session Button
Good luck :)