Tags: aenarete/KiteSimulators.jl
Tags
[Diff since v0.4.2](v0.4.2...v0.4.3) - issue #23 (Installation fails) - bump KiteControllers to 0.2.15 - bump KiteModels to 0.7.3; new RamAirKite model added, but not yet supported by KiteControllers - bump KiteUtils to 0.10.6 - improve scripts create_sys_image and run_julia
[Diff since v0.4.0](v0.4.0...v0.4.1) - the build script now only installs `matplotlib` if it is not yet installed on the system - improved the example `joystick.jl` and its documentation - bump KiteControllers to 0.2.10 - bump KiteModels to 0.6.6 A new kite model (KPS4_3L) was added, that uses three winches at the ground to steer the kite. The new variant (version 3) of the KPS4 kite model allows to define polars that do not depend on the steering input, which makes it easier to define new kites. - bump KitePodModels to 0.3.3 A simplified KitePodModel was added with a linear relationship between depower setting and depower angle, which makes it easier to define new KCUs. - a new, torque controlled winch model - you can now define the diameter and the aerodynamic drag coefficient of the KCU - plot `aerodynamics` - changes of the polars had no effect - changes of ```max_steering``` had no effect - fix example `compare_kps3_kps4.jl` - the function `next_step!` now requires either the parameter `set_speed`, which replaces `v_ro`, or the parameter `set_torque`, depending on the question if you use the `AsynchGenerator` or `TorqueControlledWinch` in the settings - the function `init_sim` has the new parameter `delta`. It should be between 0.0 and 0.03 and defines the pre-tension of the tether. The parameter `stiffness_factor` should be between 0.1 and 1.0 and not longer smaller than 0.1. - the constructor `FPCSettings` now requires the named parameter `dt` - the constructor `SystemStateControl` now requires the named parameter `u_d0` and `u_d`
[Diff since v0.3.13](v0.3.13...v0.4.0) - the build script now only installs `matplotlib` if it is not yet installed on the system - improved the example `joystick.jl` and its documentation - bump KiteControllers to 0.2.10 - bump KiteModels to 0.6.6 A new kite model (KPS4_3L) was added, that uses three winches at the ground to steer the kite. The new variant (version 3) of the KPS4 kite model allows to define polars that do not depend on the steering input, which makes it easier to define new kites. - bump KitePodModels to 0.3.3 A simplified KitePodModel was added with a linear relationship between depower setting and depower angle, which makes it easier to define new KCUs. - a new, torque controlled winch model - you can now define the diameter and the aerodynamic drag coefficient of the KCU - plot `aerodynamics` - changes of the polars had no effect - changes of ```max_steering``` had no effect - the function `next_step!` now requires either the parameter `set_speed`, which replaces `v_ro`, or the parameter `set_torque`, depending on the question if you use the `AsynchGenerator` or `TorqueControlledWinch` in the settings - the function `init_sim` has the new parameter `delta`. It should be between 0.0 and 0.03 and defines the pre-tension of the tether. The parameter `stiffness_factor` should be between 0.1 and 1.0 and not longer smaller than 0.1. - the constructor `FPCSettings` now requires the named parameter `dt` - the constructor `SystemStateControl` now requires the named parameter `u_d0` and `u_d` **Closed issues:** - Improve the joystick.jl example (#21)
## KiteSimulators v0.3.12 [Diff since v0 A926 .3.11](v0.3.11...v0.3.12) #### Changed - bump KiteControllers to 0.6.7 - bump GLMakie to 0.10.5 #### Added - add project hydra10_951 #### Fixed - fix the wind profile for the hydra20 projects - saving of plots works again - all examples have been tested and fixed where needed
## KiteSimulators v0.3.11 [Diff since v0.3.10](v0.3.10...v0.3.11) #### Added - add documentation `joystick.md` #### Changed - reduced simulation frequency to 20 Hz as required for Windows - reduced default time-lapse to 6x as required for Windows - use FAST_EXP instead of EXP law for the hydra20 settings to improve performance - smaller font for Windows - fix the example `joystick.jl` - update README.md
## KiteSimulators v0.3.10 [Diff since v0.3.9](v0.3.9...v0.3.10) #### Added - add control_plots_II diagram - add hydra20_926 project with high wind speed - add copyright waiver from TU Delft - add section kps4_3l to settings files - add function `fulldir()` to this package - add documentation page `autopilot.md` #### Changed - the script `autopilot.jl` is logging additional fields - update the hydra20 projects, both work fine now - bump KiteControllers to 0.2.6 - bump KiteModels to 0.5.16 - bump KiteUtils to 0.6.16 - remove support of Julia 1.9 - fix the example plot_log.jl - update documentation of logging **Merged pull requests:** - Docu (#16) (@ufechner7)
PreviousNext