This is a guide explaining how to use software at Arontier Co., Inc.
To sync groupware contact with your Mac/iPhone or Android, please read https://support.daouoffice.com:8443/DO_2.4.2#sync_calendar_contacts (written in Korean only). Basically groupware contact supports CardDAV. The following information can be used in Section 1.1.7 of the above reference:
- Server:
arontier.daouoffice.com - Username: your company email address
- Password: password for your company email address
To sync groupware calendar with your Mac/iPhone or Android, please read https://support.daouoffice.com:8443/DO_2.4.2#sync_calendar_contacts (written in Korean only). Basically groupware calendar supports CalDAV. The credentials described in Contact can be used in Section 1.2.7 of the above reference.
If you want to access hosts (e.g. servers, printers, NAS, and so on) in the office or IDC from non-company network (e.g. home, cafe, and so on), you may ask any of system administrators to issue an OpenVPN certificate.
Once you get a certificate file with suffix .ovpn, you should download
and install OpenVPN Client Connect from https://openvpn.net/vpn-client/.
Then import your certificate to OpenVPN Client Connect.
If you want to change the certificate password, connect to company network first (you do so in the office or with OpenVPN connection) and type one of the following in the browser address bar (don't click!):
- https://192.168.10.1 (if the certificate filename starts with
gw-headquartersorseoul) or - https://192.168.13.1:10443 (if the certificate filename starts with
gw-enchanters) or - https://192.168.40.9 (if the certificate filename starts with
gw-brainoryatap)
Enter your account name for Username field, which shows in your certificate filename
and the current password for Password to log in to the site.
After log in, you should see Update Password section.
Enter a new password twice (for Password and Confirmation) and click Save.
Then log out from the site.
Next time you use OpenVPN Client Connect, you must use the new password to connect company network.
It's not OpenVPN server nor OpenVPN Client Connect. It's just iOS: iOS hotspot does use IPv6 only, not IPv4. To address this issue, you can create a location profile and configure it.
Open a terminal on your Mac and type the following code:
networksetup -createlocation Hotspot populateYou will notice there is a new item "Location" created under Apple () menu at the top-left corner. Connect your Mac to your iOS hotspot and click "Hotspot" in Location. Then configure your Network Settings:
- Configure IPv4: Manually
- IP address: 172.20.10.2
- Subnet mask: 255.255.255.240
- Router: 172.20.10.1
- Configure IPv6: Automatically
Click OK and you should be able to use OpenVPN Client Connect again. If you disconnect from the hotspot, don't forget to choose "Automatic" in Location. Next time after you connect to the hotspot, please choose "Hotspot" in Location again. That's it.
Note. If you don't need Hotspot location any more, do this in a terminal:
networksetup -deletelocation HotspotClick https://www.sindoh.com/upload/downcenter/1708092544880391.zip to download the printer driver.
Then uncompress the downloaded file. Find and click SETUP.EXE file to start installation.
It may ask the printer network address, which is shown on a white label around the control panel of the printer itself.
It is a printer for Business Management Department only. If you are not in the department STOP NOW, FULL STOP. It's not for you. Otherwise download "HP 컬러 레이저젯 프로 M277 프린터 시리즈 통합 소프트웨어 및 PCL 6 드라이버" https://support.hp.com/kr-ko/drivers/selfservice/hp-color-laserjet-pro-mfp-m277dw/7089945/model/7089949 and install the program and the driver.