Lists (1)
Stars
A little guide to help you install & manage NVIDIA GPU driver on your Ubuntu system
Ubuntu Secure Boot Kernel Signing (MOK)
AwesomeWM manual layout with an interactive editor
ESP32 based differential pressure (and air flow) meter. Handheld, battery powered DIY device for measuring small pressure differences (Sensirion SDP810-500Pa).
Home assistant Custom Component for reading data from Fronius Gen24 Inverter and connected smart meters and battery storage through modbus TCP.
Jinja macro to find the cheapest energy prices
This is a custom component to allow control of Fronius Wattpilot wallbox/electro vehicle charging devices in Homeassistant.
Monitor and control Daikin/Rotex (hybrid/Altherma) heat pumps via the 2-wire P1/P2 thermostat interface with an ATmega328P, ESP8266, and electronics. The P1P2Serial library and P1P2Monitor program …
ESPHome Samsung HVAC Integration is an ESPHome component that connects and controls Samsung HVAC units (air conditioners and heat pumps) via a hardware bus (F1/F2 lines). It supports both NASA and …
This revolutionary software enables EV battery packs to be easily reused for stationary storage in combination with solar inverters
A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.
Log the performance of your solar panels with Fronius's DataManager
IP-Symcon (IPS) Modul für Fronius Inverter (Wechselrichter) und SmartMeter (Energiezähler) mit ModBus TCP Unterstützung (bspw. Galvo, Primo, Symo, Symo Hybrid,...).
Emulate a Fronius Modbus TCP Smart Meter
Control of Fronius Gen24, Go-E Charger and some stuff in the middle
Ladesteuerung für Fronius Symo GEN24 Plus
🔑 Raspberry Pi Encrypted Boot with Remote SSH
ESP32 firmware to read and control EMS and Heatronic compatible equipment such as boilers, thermostats, solar modules, and heat pumps