Starts a FreeRTOS task to run CoreMark benchmark.
See EEMBC for more details.
Between parenthesis result with -O0 for comparaison, otherwise -O3 is used to compile Coremark.
| Processor | Freq (MHz) | CoreMark | CoreMark/MHz |
|---|---|---|---|
| ESP8266 | 80 | 191 | 2.375 |
| ESP32 (2 cores) | 160 | 665.9 | 4.16 |
| 240 | 999.2 | 4.16 | |
| ESP32 (1 core) | 80 | 165.9 | 2.07 |
| 160 | 330.9 (78.1) | 2.07 (0.49) | |
| 240 | 494.6 | 2.06 | |
| ESP32 S2 | 80 | 157,5 | 1.97 |
| 160 | 315.2 | 1.97 | |
| 240 | 472.8 | 1.97 | |
| ... | ... | ... | ... |
(larger numbers are better)
See Espressif for latest procedure
sudo apt install gcc git wget make libncurses-dev flex bison gperf python3 python3-serial python3-pip screenmkdir -p ~/esp
cd ~/esp
wget https://dl.espressif.com/dl/xtensa-lx106-elf-gcc8_4_0-esp-2020r3-linux-amd64.tar.gz
tar -xzf xtensa-lx106-elf-gcc8_4_0-esp-2020r3-linux-amd64.tar.gz
export PATH="$PATH:$HOME/esp/xtensa-lx106-elf/bin"cd ~/esp
git clone --recursive https://github.com/espressif/ESP8266_RTOS_SDK.git
cd ESP8266_RTOS_SDK/
pip install -r requirements.txt
cd
cd git
git clone https://github.com/ochrin/coremark.git
export IDF_PATH=~/git/ESP8266_RTOS_SDK
export PATH=~/xtensa-lx106-elf/bin:$PATH
make all
make menuconfig
You may adjust CoreMark settings in CoreMark configuration else simply exit.
Number of iterations should not be too long to avoid watchdog error.
You will need to build afterward.
make flash; screen /dev/ttyUSB0 115200
Ctrl-a + k then y to exit screen
2K performance run parameters for coremark.
CoreMark Size : 666
Total ticks : 1309
Total time (secs): 13.090000
Iterations/Sec : 190.985485
Iterations : 2500
Compiler version : GCC5.2.0
Compiler flags : -O3
Memory location : STACK
seedcrc : 0xe9f5
[0]crclist : 0xe714
[0]crcmatrix : 0x1fd7
[0]crcstate : 0x8e3a
[0]crcfinal : 0x5275
Correct operation validated. See README.md for run and reporting rules.
CoreMark 1.0 : 190.985485 / GCC5.2.0 -O3 / STACK