On boot, the RGB LED will light up each color for a second in the order of
-
$${\color{RED}RED}$$ $${\color{GREEN}GREEN}$$ $${\color{BLUE}BLUE}$$
If no spell attempt is recognized within 10 seconds after boot, wifi will be activated.
$${\color{BLUE}BLUE}$$
A unsecure accesspoint named "garrick" will appear. If you join this wifi it will open a captive portal (http://192.168.4.1) where you can configure your wi 6CC8 fi network. Afterwards it will reboot into the next update sequence.
If the device joins a known network it will, instead of opening an accesspoint, try to update.
-
$${\color{BLUE}BLUE}$$ $${\color{BLUE}BLUE}$$ $${\color{BLUE}BLUE}$$
If the update progress succeeds it will signal this via the LED.
-
$${\color{GREEN}GREEN}$$ $${\color{GREEN}GREEN}$$ $${\color{GREEN}GREEN}$$
In version < 1.0.2 any movement will light up the led and play sound
$${\color{BLUE}BLUE}$$ $${\color{RED}RED}$$
In version 1.0.2 the spell sequence needs to be initialized by holding the wand straight downwards
-
$${\color{GREEN}GREEN}$$ $${\color{GREEN}\infty}$$
In version 1.0.3 the spell sequence needs to be initialized by holding the wand straight upwards
-
$${\color{GREEN}GREEN}$$ $${\color{GREEN}\infty}$$
accelerometer not found
-
$${\color{RED}RED}$$ $${\color{BLUE}BLUE}$$ $${\infty}$$