Releases: roge-rm/otto
otto-v02-bookworm32lite
This is a Raspberry Pi OS Bookworm (32 bit) image set up using the steps in the readme.
I have made a few small changes since the last release:
- moved to Bookworm base (instead of Bullseye)
- added a line to crontab to run the autoconnect script at boot (for any devices already connected before startup is complete)
- added a second image with BlueAlsa BLE-MIDI server enabled (otto-v02a-bookworm32lite-btenabled)
With BT-equipped Pis you can now connect to them as a MIDI BLE device and have your MIDI data routed to USB connected devices.
If you connect a network cable (either directly, or with a USB adapter) you can login with the credentials otto/otto
This should work on any Raspberry Pi and has been tested on a Raspberry Pi Zero 2 W as well as a Raspberry Pi 2B.
This require an 8GB microSD card or larger!
Write this to the card using Rufus or Win32 Disk Imager for Windows, or dd on linux/mac.
otto-v01-legacy32lite
This require an 8GB microSD card or larger!
Write this to the card using Rufus or Win32 Disk Imager for Windows, or dd on linux/mac.
This is a Raspberry Pi OS Legacy (32 bit) image set up using the steps in the readme.
This should work on any Raspberry Pi and has been tested on a Raspberry Pi Zero 2 W as well as a Raspberry Pi 2B.
WIFI is disabled but SSH is enabled. If you connect a network cable (either directly, or with a USB adapter) you can login with the pi/raspberry credentials.