Tags: skrtbhtngr/strace
Tags
Noteworthy changes in strace 4.26 (2018-12-26)
==============================================
* License
* The test suite is now provided under the terms of
the GNU General Public License version 2 or later.
* All the rest of strace is now provided under the terms of
the GNU Lesser General Public License version 2.1 or later.
* Changes in behavior
* If strace is interrupted by a signal it handles (currently
one of HUP, INT, QUIT, PIPE, or TERM), strace terminates
itself with this signal.
* Improvements
* Implemented obtainment of system call information using
PTRACE_GET_SYSCALL_INFO ptrace API.
* Implemented decoding of PTRACE_GET_SYSCALL_INFO ptrace request.
* Implemented decoding of BLKGETZONESZ, BLKGETNRZONES, and RND* ioctl
commands.
* Enhanced xlat styles support configured by -X option.
* Enhanced internet address formatting in structureless contexts.
* Enhanced decoding of getsockopt SO_ERROR option.
* Enhanced error diagnostics when the first exec fails.
* Added %net as a short form of %network in syscall specifications.
* Updated lists of ABS_*, BPF_*, FAN_*, IFA_*, IFLA_*, KVM_CAP_*, NETLINK_*,
NTF_*, PR_SPEC_*, REL_*, SOL_*, TCA_*, and V4L2_* constants.
* Updated lists of ioctl commands from Linux 4.20.
* Enhanced manual page.
* Bug fixes
* Fixed "xlat_idx: Unexpected xlat value 0" warnings.
* Fixed sthyi output format on s390.
* Documented -X option in strace -h output.
Contributors
============
This release was made possible by the contributions of many people.
The maintainers are grateful to everyone who has contributed
changes or bug reports. These include:
* Dmitry V. Levin
* Dmitry Vyukov
* Eugene Syromyatnikov
* Gleb Fotengauer-Malinovskiy
* Jamal Hadi Salim
* Janosch Frank
* Masatake YAMATO
* Rasmus Villemoes
* Shankara Pailoor
Please refer to the CREDITS file for the full list of strace contributors.
Noteworthy changes in strace 4.25 (2018-10-30)
==============================================
* Improvements
* Implemented decoding of KVM_CHECK_EXTENSION and NBD_* ioctl commands.
* Implemented decoding of SOL_XDP socket option names.
* Implemented decoding of AF_PACKET protocols in socket syscall.
* Implemented decoding of AF_AX25 and AF_X25 addresses, protocols,
and options.
* Implemented stack trace printing on receiving signals.
* Enhanced xlat styles support configured by -X option.
* Enhanced decoding of IFLA_*, NETCONFA_*, and SMC_DIAG_* netlink attributes.
* Wired up io_pgetevents syscall on arm, sparc, and sparc64.
* Updated lists of AF_*, AUDIT_*, BPF_*, IFLA_*, IN_*, IPSTATS_*,
IPV4_DEVCONF_*, NT_*, SCTP_*, SO_*, SOCK_*, SOL_*, and V4L2_* constants.
* Updated lists of ioctl commands from Linux 4.19.
* Bug fixes
* Fixed decoding of bit sets in evdev ioctl commands.
* Fixed decoding of EVIOCGBIT(0, ...) ioctl commands.
* Fixed test suite for the case when mlockall and unimplemented syscalls
are explicitly disabled by a seccomp filter.
Contributors
============
This release was made possible by the contributions of many people.
The maintainers are grateful to everyone who has contributed
changes or bug reports. These include:
* Dmitry V. Levin
* Elvira Khabirova
* Eugene Syromyatnikov
* Gleb Fotengauer-Malinovskiy
* Pierre Marsais
* Zhibin Li
Please refer to the CREDITS file for the full list of strace contributors.
Noteworthy changes in strace 4.24 (2018-08-14)
==============================================
* Improvements
* Implemented decoding of kvm vcpu exit reason (-e kvm=vcpu option),
requires Linux kernel version 4.16.0 or higher.
* Implemented decoding of KVM_SET_CPUID2 and KVM_GET_*_CPUID ioctl commands.
* Enhanced decoding of corner cases of SO_LINGER, SO_PEERCRED,
and PACKET_STATISTICS getsockopt options.
* Wired up io_pgetevents and rseq syscalls on hppa, microblaze, mips, powerpc,
and s390.
* Updated lists of AUDIT_*, BPF_*, IFA_*, IFLA_*, RTA_*, RTPROT_*, TCP_*,
TRAP_*, and UDP_* constants.
* Updated lists of ioctl commands from Linux 4.18.
* Bug fixes
* Fixed decoding of Q_XGETQSTAT on non-native personalities.
* Fixed race condition in aio test.
* Fixed build with Bionic libc.
* Fixed build with glibc-2.28.
* Fixed build in exotic systemd-nspawn based environments.
* Fixed build on s390 with kernel headers that do not contain Linux commit
v3.10-rc1~201^2~11.
Contributors
============
This release was made possible by the contributions of many people.
The maintainers are grateful to everyone who has contributed
changes or bug reports. These include:
* Chen Jingpiao
* Dmitry V. Levin
* Elliott Hughes
* Eugene Syromyatnikov
* Gleb Fotengauer-Malinovskiy
* Masatake YAMATO
* Pierre Marsais
* Zhibin Li
NEWS for strace version 4.23 ============================ * Changes in behaviour * On x32 personality, 64-bit syscalls (such as readv) are now shown with "strace#64" suffix instead of "64:" prefix. Unlike the old names, these new names can be used in syscall qualification expressions. * Changed error number output format: error numbers are consistently printed as "-1 ECONST (Error description)" for known errors and as "-1 (errno 123)" for unknown errors, regardless of -e raw qualification settings. One can specify -X raw for displaying raw error numbers unconditionally. * Unfetchable addresses inside arrays are now printed as comments. * Obsolete IA-32 mode syscall names are no longer printed on ia64. * Improvements * Implemented libdw backend for -k option, configured at build time using --with-libdw option. Whether -k option is compiled is now configured at build time using --enable-stacktrace option. * Added -X option for configuring xlat output formatting (addresses Debian bug #692915). * Added support for personality designation ("64", "32", or "x32") to syscall qualifications in -e trace expressions. * Implemented injection of syscalls with no side effects as an alternative to injection of an invalid syscall (-e inject=SET:syscall= expression). * Improved support for reproducible builds (addresses Debian bug #896016). * Implemented decoding of BPF_PROG_QUERY and BPF_RAW_TRACEPOINT_OPEN bpf syscall commands. * Implemented decoding of INOTIFY_IOC_SETNEXTWD and PERF_EVENT_IOC_* ioctl commands. * Implemented decoding of PR_GET_SPECULATION_CTRL and PR_SET_SPECULATION_CTRL prctl syscall options. * Enhanced decoding of bpf, getsockopt, setsockopt, and socket syscalls. * Enhanced decoding of NETLINK_KOBJECT_UEVENT and NETLINK_ROUTE protocols. * Enhanced decoding of *_DIAG_MEMINFO netlink attributes. * Enhanced decoding of BTRFS_*, FS_IOC_*, SIOCGIFHWADDR, and SIOCSIFHWADDR ioctl commands. * Enhanced decoding of AF_BLUETOOTH socket addresses. * Implemented decoding of io_pgetevent syscall. * Wired up rseq syscall. * Updated lists of ADJ_*, BPF_*, BPF_F_*, BPF_PROG_TYPE_*, ETH_P_*, FPE_*, IFF_*, IPPROTO_*, MAP_*, MS_*, MSG_*, NETLINK_*, PACKET_*, PROT_*, SCTP_*, SECCOMP_FILTER_FLAG_*, SEGV_*, SEM_*, SHM_*, SW_*, V4L2_CID_*, V4L2_CTRL_CLASS_*, and V4L2_PIX_FMT_* constants. * Updated lists of ioctl commands from Linux 4.17. * Bug fixes * Fixed decoding of msgtyp argument of msgrcv syscall. * Fixed fallback definitions for F_*, MCL_*, MSG_ZEROCOPY, SI_*, and SOL_SOCKET constants. * Fixed -e trace=%pure expression on mips. Contributors ============ This release was made possible by the contributions of many people. The maintainers are grateful to everyone who has contributed changes or bug reports. These include: * Andre McCurdy * Chris Lamb * Dmitry V. Levin * Eugene Syromyatnikov * Gleb Fotengauer-Malinovskiy * Harsha Sharma * Mark Wielaard * Masatake YAMATO * Zhibin Li
NEWS for strace version 4.22
============================
* Changes in infrastructure
* The mailing list was moved to strace-devel@lists.strace.io.
* SourceForge git repository
(https://sourceforge.net/p/strace/code/ci/master/tree/) is no longer
maintained. Please use GitLab (https://gitlab.com/strace/strace/)
or GitHub (https://github.com/strace/strace/) repository instead.
* Changes in behaviour
* When printing string data, '8' and '9' following an octal escape sequence
no longer lead to unabbreviated octal escape sequence output, as they used
to do.
* Angle brackets are now printed as octal number escape sequences
in the output of paths associated with file descriptors.
* Data dump for write syscalls (-e write) is performed regardless
of successfulness of these syscall (addresses Debian bug #436284).
* -r and -t options are now affect output independently. Previously,
-r option led to ignoring of the -t option (addresses Debian bug #466195).
* Improvements
* Implemented delay injection (-e inject=SET:delay_enter= and
-e inject=SET:delay_exit= options).
* Added -A option for opening output files in append mode
(addresses Debian bug #528488).
* IPv6 addresses shown in socket information in -yy mode are now printed
in brackets.
* Enhanced decoding of bpf, prctl and ptrace syscalls.
* Enhanced decoding of BTRFS_IOC_INO_PATHS, BTRFS_IOC_LOGICAL_INO, and PTP_*
ioctl commands.
* Enhanced NETLINK_ROUTE protocol decoding.
* Updated lists of signal codes.
* Updated lists of BPF_*, BTN_*, ETH_P_*, INET_DIAG_BC_*, KEY_*, POLL*, RWF_*,
SCHED_FLAG_*, SCTP_* and error constants.
* Implemented block/character device number printing in -yy mode.
* Known pixel/SDR format names are printed as comments for pixelformat fields
in v4l2 structures.
* Enhanced decoding of kern_features syscall.
* Enhanced NETLINK_NETFILTER netlink protocol decoder.
* Optimized handling of large number of tracees.
* Improved wall clock time measurement in syscall count statistics
(-c -w option).
* Extended the range of allowed values in -e inject=...:retval= expression.
* Added i18n support.
* Updated lists of ioctl commands from Linux 4.16.
* Enhanced manual page.
* Bug fixes
* Fixed build on m68k.
* Fixed v4l2 pixelformat decoding on big-endian architectures.
* Fixed -O option.
Contributors
============
This release was made possible by the contributions of many people.
The maintainers are grateful to everyone who has contributed
changes or bug reports. These include:
Chen Jingpiao
Dmitry V. Levin
Elvira Khabirova
Eugene Syromyatnikov
Gleb Fotengauer-Malinovskiy
Harsha Sharma
J. Bruce Fields
Josh Triplett
Masatake YAMATO
Philipp Marek
NEWS for strace version 4.21
============================
* Changes in behaviour
* Warning is now issued when -F option is used.
* Warning is now issued when a tracee with unsupported personality
is attached.
* Unknown syscall numbers are now printed in hexadecimal form.
* Improvements
* Implemented decoding of netlink descriptor attributes as file descriptors.
* Implemented decoding of hugetlb page size selection flags.
* Implemented decoding of BPF_PROG_TEST_RUN, BPF_PROG_GET_NEXT_ID,
BPF_MAP_GET_NEXT_ID, BPF_PROG_GET_FD_BY_ID, BPF_MAP_GET_FD_BY_ID,
and BPF_OBJ_GET_INFO_BY_FD commands of bpf syscall.
* Enhanced decoding of get_thread_area, memfd_create, modify_ldt,
perf_event_open, reboot, s390_guarded_storage, s390_pcio_mmio_read,
s390_pci_mmio_write, s390_runtime_instr, s390_sthyi, set_thread_area,
and shmget syscalls.
* Implemented decoding of KVM_* and DM_LIST_DEVICES ioctl commands.
* Implemented decoding of riscv_flush_icache syscall.
* Enhanced decoding of getsockopt and setsockopt syscalls for SOL_NETLINK
level.
10000
* Enhanced decoding of BPF_MAP_CREATE command of bpf syscall.
* Print values returned by mq_open syscall and first arguments
of mq_getsetattr, mq_notify, mq_timedreceive, and mq_timedsend syscalls
as file descriptors.
* Added decoding of get_tls syscall on arm.
* Added -e trace=%pure option for tracing system calls with no arguments that
never fail.
* Updated lists of IPV6_*, MAP_*, MEMBARRIER_CMD_*, MSG_*, NT_*, PKEY_*,
SHM_*, and TCP_* constants.
* Added manual page for the strace-log-merge command.
* Updated lists of ioctl commands from Linux 4.15.
* Implemented biarch support for s390x.
* Implemented an optional support for symbol demangling in strace -k output
(activated by --with-libiberty configure option).
* Information about availability of demangling and reliable personality
decoding (on architectures with multiple personalities) is now available
in strace -V output.
* Added decoding of pkey_alloc, pkey_free, and pkey_mprotect syscalls on
powerpc and powerpc64.
* Enhanced manual page.
* Bug fixes
* Fixed multi-personality support in cross builds.
* Added mq_getsetattr, mq_notify, mq_open, mq_timedreceive, and mq_timedsend
syscalls to %desc tracing set.
* Fixed path tracing support for mmap syscalls with indirect arguments and
for old select syscall.
* Fixed decoding of arm-specific (__ARM_NR_*) syscalls.
* Fixed open mode flags decoding.
* Fixed corner cases in handling of strace -ff -ttt logs by strace-log-merge.
* Error counts that exceed one billion are now printed correctly in call
summary output.
* Fixed call summary header for x32 personality.
* Changes of tracee personalities are reported more reliably.
* Fixed the case when strace attaches to a tracee being inside exec and its
first syscall stop is syscall-exit-stop instead of syscall-enter-stop,
which messed up all the syscall state tracking.
* Fixed printing of higher 32 bits of the return value for x32 personality.
* Portability
* A C compiler that supports "for" loop initial declarations is now required.
* Inability to configure multiple personality support on architectures where
multiple personalities are supported leads to configuration failure during
build now. Use --enable-mpers=check to revert to the old behaviour.
* Build-time requirement for the mpers support has been lowered from gawk 4
to gawk 3.
* Removed incomplete and non-functional support for the CRIS architecture.
* Removed incomplete and unused support for IA-32 mode on the IA-64
architecture.
Contributors
============
This release was made possible by the contributions of many people.
The maintainers are grateful to everyone who has contributed
changes or bug reports. These include:
Chen Jingpiao
DJ Delorie
Dmitry V. Levin
Elvira Khabirova
Eugene Syromyatnikov
Gleb Fotengauer-Malinovskiy
Harsha Sharma
Lubomir Rintel
Masatake YAMATO
Nikolay Marchuk
Rolf Eike Beer
Victor Krapivensky
Vitaly Chaykovsky
NEWS for strace version 4.20
============================
* Improvements
* Implemented decoding of NETLINK_NETFILTER netlink message types and flags.
* Implemented decoding of SECCOMP_GET_ACTION_AVAIL operation of seccomp
syscall.
* Updated lists of ARPHRD_*, BPF_*, ETH_P_*, LOOP_*, MADV_*,
MEMBARRIER_CMD_*, MFD_*, SECCOMP_*, SO_*, SOL_*, TCP_*, and UFFD_FEATURE_*
constants.
* Added decoding of statx syscall on hppa.
* Updated lists of ioctl commands from Linux 4.14.
* Bug fixes
* Fixed powerpc personality support on powerpc64.
Contributors
============
This release was made possible by the contributions of many people.
The maintainers are grateful to everyone who has contributed
changes or bug reports. These include:
Baruch Siach
Dmitry V. Levin
Eugene Syromyatnikov
Gleb Fotengauer-Malinovskiy
JingPiao Chen
Steve McIntyre
NEWS for strace version 4.19
============================
* Changes in behaviour
* Changed formatting of personality names on tile architecture in order
to make it in line with other multi-personality architectures.
* Changed field output order in struct v4l2_requestbuffers to improve in/out
field formatting.
* Changed handling of multiple signal= specifications in an injection
expression: multiple specification now leads to error instead of implicit
usage the last specification.
* Improvements
* Enhanced decoding of optlen argument of getsockopt syscall.
* Enhanced decoding of SO_LINGER option of getsockopt and setsockopt syscalls.
* Enhanced decoding of SO_PEERCRED option of getsockopt syscall.
* Enhanced decoding of IP_ADD_MEMBERSHIP, IP_DROP_MEMBERSHIP,
IPV6_ADD_MEMBERSHIP, IPV6_DROP_MEMBERSHIP, IPV6_JOIN_ANYCAST,
IPV6_LEAVE_ANYCAST, MCAST_JOIN_GROUP, and MCAST_LEAVE_GROUP options
of setsockopt syscall.
* Enhanced decoding of KEYCTL_DH_COMPUTE operation of keyctl syscall
(KDF parameters decoding).
* Implemented decoding of KEYCTL_RESTRICT_KEYRING operation of keyctl syscall.
* Enhanced decoding of UFFDIO_API ioctl command.
* Enhanced decoding of BPF_PROG_LOAD, BPF_MAP_CREATE, BPF_MAP_LOOKUP_ELEM,
and BPF_MAP_GET_NEXT_KEY commands of bpf syscall.
* Implemented decoding of linux socket filter programs specified
for SO_ATTACH_FILTER and SO_ATTACH_REUSEPORT_CBPF socket options.
* Implemented decoding of inet_diag_req_v2, inet_diag_req_compat,
packet_diag_msg, and smc_diag_msg netlink attributes of NETLINK_SOCK_DIAG.
* Implemented NETLINK_SELINUX protocol specific decoding.
* Implemented decoding of netlink message ack flags.
* Implemented decoding of nlmsgerr netlink attributes.
* Implemented basic protocol specific decoding of NETLINK_CRYPTO.
* Implemented decoding of crypto_user_alg netlink attributes
of NETLINK_CRYPTO.
* Implemented basic protocol specific decoding of addr, addrlabel, dcb, link,
mdb, neigh, neightbl, netconf, nsid, route, rule, tc, and tca messages
of NETLINK_ROUTE.
* Implemented decoding of NETLINK_KOBJECT_UEVENT messages.
* Improved handling of unexpected tracees (the ones that cloned with
CLONE_PARENT/CLONE_PTRACE or called PTRACE_TRACEME on themselves): they
are now PTRACE_DETACH'ed instead of PTRACE_CONT'ed.
* Updated lists of BPF_*, KEY_*, RWF_*, SCM_*, SO_*, and *_MAGIC constants.
* Added decoding of arch_prctl syscall on x86.
* Added decoding of seccomp, bpf, userfaultfd, membarrier, mlock2,
copy_file_range, preadv2, pwritev2, and statx on alpha.
* Added decoding of statx syscall on microblaze.
* Added decoding of s390_guarded_storage syscall on s390.
* Updated lists of ioctl commands from Linux 4.13.
* Enhanced manual page.
* Bug fixes
* Fixed printing of group_req structure on non-native personalities.
* Fixed output formatting of blkpg_ioctl_arg, dm_name_list, and iocb
structures.
* Fixed formatting of nul-terminated strings which have kernel-imposed size
limit.
* Fixed printing of paths that hit PATM_MAX limit in order to match kernel's
behaviour.
* Fixed build warnings on Android mips64.
* Fixed unused function "is_negated_errno" build warning when built
with clang.
* Fixed syscall number and arguments retrieval behaviour on sparc64 and
mips o32 after prctl(PR_SET_DUMPABLE, 0) makes PTRACE_PEEKTEXT impossible
to use if Linux kernel has commit v4.10-rc1~114^2~2.
* Fixed path tracing for execveat, symlink, symlinkat, inotify_add_watch,
and inotify_init syscalls.
* Fixed personality switch printing on sparc64 and risc-v.
Contributors
============
This release was made possible by the contributions of many people.
The maintainers are grateful to everyone who has contributed
changes or bug reports. These include:
Anatoly Pugachev
Dmitry V. Levin
Edgar Kaziakhmedov
Eugene Syromyatnikov
Fabien Siron
Gleb Fotengauer-Malinovskiy
JingPiao Chen
Lazar Trsic
Nikolay Marchuk
Victor Krapivensky
NEWS for strace version 4.18
============================
* Improvements
* Implemented decoding of SCM_TIMESTAMP* control messages.
* Implemented decoding of netlink NLMSG_DONE messages.
* Implemented decoding of netlink generic nlmsg_type and nlmsg_flags.
* Implemented decoding of NETLINK_AUDIT, NETLINK_NETFILTER, NETLINK_ROUTE,
NETLINK_SELINUX, NETLINK_SOCK_DIAG, and NETLINK_XFRM message types.
* Implemented decoding of NETLINK_GENERIC protocol families.
* Implemented basic protocol specific decoding of AF_INET, AF_INET6,
AF_NETLINK, AF_PACKET, AF_SMC, and AF_UNIX messages of NETLINK_SOCK_DIAG.
* Implemented basic decoding of netlink attributes.
* Implemented basic protocol specific decoding of AF_INET, AF_NETLINK,
AF_PACKET, AF_SMC, and AF_UNIX netlink attributes of NETLINK_SOCK_DIAG.
* Implemented decoding of inet_diag_msg, netlink_diag_msg, and unix_diag_msg
netlink attributes of NETLINK_SOCK_DIAG.
* Updated lists of ARPHRD_*, KEYCTL_*, NDIAG_SHOW_*, RTM_*, SCM_*, SCTP_*,
SO_*, V4L2_*, and prctl ARCH_* constants.
* Updated lists of ioctl commands from Linux 4.12.
* Bug fixes
* In interactive mode (-I2), those signals that were blocked at startup
will remain blocked for the whole period of strace execution.
* strace no longer resets SIGCHLD handler in tracees to the default action.
* When traced command is terminated by a blocked signal, strace unblocks
that signal to ensure its own termination with the same signal.
* Fixed corner cases in decoding of old sigaction syscall.
* Fixed build with old kernel headers on mips.
* Fixed build on aarch64 and tile with glibc >= 2.26.
* Fixed build on arc and nios2.
Contributors
============
This release was made possible by the contributions of many people.
The maintainers are grateful to everyone who has contributed
changes or bug reports. These include:
Andreas Schwab
David Robins
Dmitry V. Levin
Eugene Syromyatnikov
Eugeniy Paltsev
Fabien Siron
Gleb Fotengauer-Malinovskiy
JingPiao Chen
Khem Raj
Masatake YAMATO
Miroslav Lichvar
Romain Naour
Victor Krapivensky
NEWS for strace version 4.17
============================
* Changes in command line syntax
* Syscall classes specified in -e trace= option now have % prefix (like
-e trace=%process). Old style class names without leading % are still
supported, but considered deprecated now.
* Improvements
* Optimized syscall filtering.
* Improved representation of timestamps.
* Enhanced decoding of sched_setattr syscall.
* Added -e trace=%stat option for tracing variants of stat syscall.
* Added -e trace=%lstat option for tracing variants of lstat syscall.
* Added -e trace=%fstat option for tracing variants of fstat and fstatat
syscalls.
* Added -e trace=%%stat option for tracing syscalls used for querying file
status information (stat, lstat, fstat, fstatat, statx, and their
variations).
* Added -e trace=%statfs option for tracing statfs, statfs64 and statvfs
syscalls.
* Added -e trace=%fstatfs option for tracing fstatfs, fstatfs64 and fstatvfs
syscalls.
* Added -e trace=%%statfs option for tracing syscalls used for querying file
system statistics information (statfs-like, fstatfs-like and ustat).
* Added -e trace=/regex option for filtering syscalls using regular
expressions.
* Added support for prepending of question mark before syscall qualification
in -e trace expressions in order to suppress error in case no syscalls
matched the provided qualification.
* Implemented decoding of signal mask in rt_sigreturn syscall on alpha, arc,
arm, avr32, bfin, cris, hppa, m68k, metag, microblaze, mips, nios2, or1k,
powerpc, powerpc64, riscv, sh, sh64, sparc, sparc64, tile, x86, and xtensa
architectures.
* Implemented decoding of statx syscall.
* Implemented decoding of NS_* ioctl commands.
* Implemented decoding of the remaining V4L2_BUF_TYPE_* types.
* Implemented decoding of VIDIOC_[SG]_TUNER ioctl commands.
* Implemented decoding of NLMSG_ERROR netlink messages.
* Improved decoding of BPF_PROG_ATTACH command of bpf syscall.
* Improved decoding of misplaced parts in DM_* ioctl commands.
* Updated lists of ioctl commands from Linux 4.11.
* Bug fixes
* Fixed decoding of flags argument of preadv2 and pwritev2 syscalls on x32.
* Fixed the number of arguments and tracing flags of alpha specific syscalls.
* Fixed decoding of old sigsuspend syscall on alpha, cris, mips, powerpc,
powerpc64, sh, sh64, sparc, and sparc64.
* Fixed decoding of sgetmask and ssetmask syscalls on 64-bit architectures.
* Fixed decoding of netlink messages received within struct msghdr.
* Worked around a bug in miscompiled aarch64 kernels leading to the 3rd
argument of sched_getattr syscall being not quite 32-bit.
* Fixed corner cases of printing inaccessible times argument of utimes
and futimesat syscalls.
Contributors
============
This release was made possible by the contributions of many people.
The maintainers are grateful to everyone who has contributed
changes or bug reports. These include:
Abhishek Tiwari <erabhishektiwarics@gmail.com>
Andreas Schwab <schwab@suse.de>
Damien Profeta <damien.profeta@amadeus.com>
Dmitry V. Levin <ldv@altlinux.org>
Edgar Kaziahmedov <edos@linux.com>
Elvira Khabirova <lineprinter0@gmail.com>
Eugene Syromyatnikov <evgsyr@gmail.com>
Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
JingPiao Chen <chenjingpiao@gmail.com>
Md Haris Iqbal <haris.phnx@gmail.com>
Nikolay Marchuk <marchuk.nikolay.a@gmail.com>
Quentin Monnet <quentin.monnet@6wind.com>
Rishi Bhatt <bhatt.rishi062@gmail.com>
Sandhya Bankar <bankarsandhya512@gmail.com>
Victor Krapivensky <krapivenskiy.va@phystech.edu>
PreviousNext