Home-Assistant MQTT bridge for Panasonic Comfort Cloud. Supports automatic entity registration to Home Assistant and full control over the devices.
Note: Current version has been tested with model CS-HZ25UKE, let me know if noticing any problems with other models
Uses pcomfortcloud for Panasonic Comfort Cloud and paho-mqtt for MQTT.
- Auto registers entities to Home Assistant
- Fan speed controls
- AC operating modes
- Target temperature controls
- Non-optimistic behaviour
- Power controls for retaining preset modes
- Inside and outside temperature sensors
- Eco-mode controls
- Swing settings (horizontal and vertical)
- Device bundling
- Respects HA birth and last will events
usage: run.py [-h] [-u USERNAME] [-P PASSWORD] [-s SERVER] [-p PORT] [-t TOPIC] [-l {DEBUG,INFO,WARNING,ERROR,CRITICAL}]
Home-Assistant MQTT bridge for Panasonic Comfort Cloud
optional arguments:
-h, --help show this help message and exit
-u USERNAME, --username USERNAME
Panasonic Comfort Cloud username, usually email address. Environment variable `USERNAME`
-P PASSWORD, --password PASSWORD
Panasonic Comfort Cloud password. Environment variable `PASSWORD`
-s SERVER, --server SERVER
MQTT server address, default `localhost`. Environment variable: `MQTT`
-p PORT, --port PORT MQTT server port, default 1883. Environment variable `MQTT_PORT`
-i INTERVAL, --interval INTERVAL
Device update interval in seconds, default 60. Not recommended to put value below 60
as this might cause too many request error from the API. Environment variable `UPDATE_INTERVAL`
-t TOPIC, --topic TOPIC
MQTT discovery topic prefix, default `homeassistant`. Environment variable TOPIC_PREFIX.
-l {DEBUG,INFO,WARNING,ERROR,CRITICAL}, --log {DEBUG,INFO,WARNING,ERROR,CRITICAL}
Logging level to use, defaults to INFO
Example,
git clone https://github.com/slvwolf/panasonic-comfort-cloud-mqtt.git
pip3 install .
python3 run.py -u username@dev.null -P 123password -s 127.0.0.1
Currently there are no readily built Docker images but building the image yourself can be done simply by running make docker.
Example of building and running (just change USERNAME, PASSWORD and MQTT variables),
git clone https://github.com/slvwolf/panasonic-comfort-cloud-mqtt.git
make docker
docker run -it -d --name pcc-mqtt -e "USERNAME=username@dev.null" -e "PASSWORD=123password" -e "MQTT=127.0.0.1" pcc-mqtt
Available env. variables,
- USERNAME
- PASSWORD
- MQTT (default: localhost)
- MQTT_PORT (default: 1883)
- INTERVAL (default 60)
- TOPIC_PREFIX (default: homeassistant)
- LOG_LEVEL (default: info)
At minimum USERNAME, PASSWORD and MQTT needs to be defined
To access the logs run,
docker logs pcc-mqtt
- Docker package
- Fan mode support
- Support for Eco mode
- Support for Nano mode
- Fan speed support
- Service state events
- Power usage metrics