🚦 This is a prototype circuit for an intersection(crossroads) roundabout traffic light system. The inputs are the sensors, i.e. infrared sensors that detect the presence of vehicles, plus a timing system. The heart of this circuit the micro-controller which coordinates all the activities.
➕➕ Arithmetic operations in most machines are performed in the ALU whereby logic gates and flipflops are combined so that they can subtract, multiply, and divide binary numbers. This circuit only implements the addition part, on four bit digits
This is a 10V and 5Amp current rating linear power supply with protection circuits.
💡 A circuit that is used to control a room lighting automatically depending on the time of day, whether day or night. It uses an LDR(Light Dependent Resistor) that varies the resistance depending on the enviroment's light intensity, and thus controls the room light
This is a simple circuit that will blink the LEDs in regular time period. It is made up of a series of Bi-Color LEDs which are driven either by a 555 timing circuit or by a PNP transistor interchangeably.
A simple yet complicated design of the infrared light transmitter circuit. Consist of a 555 timer and an IR LED to emit the IR signal
🚦 Designing a two-way traffic signal using logic gates as a combinational logic circuit and flip-flops for sequential control.
〽Basically a circuit used to check continuity in a wire connection or a device, this can save you a lot of headache if you are normallly into hardware wire connections
➕➖ Arithmetic operations in most machines are performed in the ALU whereby logic gates and flipflops are combined so that they can subtract, multiply, and divide binary numbers. This circuit only implements the addition part and subtraction on four bit digits
Add a description, image, and links to the multism topic page so that developers can more easily learn about it.
To associate your repository with the multism topic, visit your repo's landing page and select "manage topics."