Tags: vansinba/lora_gateway
Tags
v3.9.9 - Changed GPS module to get native GPS time (monotonic, no leap second) instead of UTC time. - lgw_cnt2utc and lgw_utc2cnt functions have been replaced by lgw_cnt2gps and lgw_gps2cnt. ** WARNING: ** ** The native GPS time is not given in standard NMEA messages, so we get it from a proprietary message of the GPS module used on gateway reference design, u-blox 7. If you are not using the same GPS module, you may have to update the lgw_parse_ubx() function. ** NOTE: ** ** This version is to be used with the packet forwarder v2.9.9 for experimental Class-B support.
v2.0.0 - Added support for Kerlink 868 27dBm gateway - Updated global_conf.eu868.json (in packet logger) to new LoRaWAN frequency plan - Added version numbers to AGC, arbiter and calibration firmware (those versions are checked at startup) - Added test_loragw_cal to test radio calibrations - Fixed minor bug in error coverage in register read/write functions /!\ warning: Kerlink 868 27dBm gateway includes a FPGA that MUST be programmed before running any application
PreviousNext