A Suite of c++ libraries for radio astronomy data processing.
The casacore source code is maintained on github.
You can obtain it using:
$ git clone https://github.com/casacore/casacore
To compile casacore you need to meet the following requirements:
- cmake
- gfortran
- ncurses
- flex
- bison
- blas
- lapack
- cfitsio (3.181 or later)
- wcslib (4.20 or later)
- fftw3 (optional)
- hdf5 (optional)
- numpy (optional)
- boost-python (optional)
On Debian / Ubuntu you can install these with:
$ sudo apt-get install cmake gfortran libncurses5-dev libreadline-dev flex \
bison libblas-dev liblapacke-dev libcfitsio3-dev wcslib-dev
and the optional libraries:
$ sudo apt-get install libhdf5-serial-dev libfftw3-dev python-numpy \
libboost-python-dev
Various parts of casacore require measures data, which requires regular updating. You can obtain the WSRT measures archive from the ASTRON FTP server:
ftp://ftp.astron.nl/outgoing/Measures/
Extract this somewhere on a permanent location on your filesystem.
In the casacore source folder run:
mkdir build
cd build
cmake ..
make
make install
there are various flags available to cmake to enable and disable options:
$ cmake -DUSE_FFTW3=ON -DDATA_DIR=/usr/share/casacore/data -DUSE_OPENMP=ON \
-DUSE_HDF5=ON -DBUILD_PYTHON=ON -DUSE_THREADS=ON
The DATA_DIR should point to the location where you extracted the measures
data.
If you run Ubuntu 14.04 you can use precompiled binary packages
https://launchpad.net/~radio-astro/+archive/ubuntu/main
installation commands:
sudo apt-get install software-properties-common
sudo add-apt-repository ppa:radio-astro/main
sudo apt-get update
sudo apt-get install casacore2 casacore-data
http://casacore.github.io/casacore
If you have any issues compiling or using casacore, please open an issue on the issue tracker on github. If you have patches please open a pull request.