Tags: xeniter/debian-var
Tags
imx93-var-som: meta-variscite-bsp-imx: update to latest include the following: d1b75c0 iw612-utils: imx93-var-som: avoid error if interface is already down b7cfc21 iw612-utils: imx93-var-som: iw612-bt: increase uart speed to 3000000 Signed-off-by: Nate Drude <nate.d@variscite.com>
weston_rootfs: fix comment Signed-off-by: FrancescoFerraro <francesco.f@variscite.com>
scripts: Rework-fixup linux kernel headers based on patch version Apply linux kernel headers fix based on kernel patch versions Signed-off-by: Harshesh Valera <harshesh.v@variscite.com>
imx8mq-var-dart: pm-utils: re-sort eth hook In case of DART-MX8M the wifi hook is managing the fec kernel module. Accordingly the eth hook should be executed before the wifi hook on suspend and after on resume. Otherwise the eth hook will fail, trying to access the ether device: $ cat /var/log/pm-suspend.log ... Running hook /etc/pm/sleep.d/03-eth.sh resume suspend: eth*: ERROR while getting interface flags: No such device eth*: ERROR while getting interface flags: No such device /etc/pm/sleep.d/03-eth.sh resume suspend: Returned exit code 255. Therefore the eth hook will be re-sorted to the beginning by re- naming it from 03-eth.sh to 00-eth.sh to make sure it is called first on suspend and last on resume. Signed-off-by: Alexander Herfurtner <alexander.h@variscite.com>
var_make_debian: add make_rootfs_base as dependency for kernelpackage The -c kernelpackage command depends on the development rootfs for chroot. Add the base rootfs as a dependency for kernelpackage. Signed-off-by: Nate Drude <nate.d@variscite.com>
imx8mq-var-dart: Add Ethernet suspend/resume script This initializes the PHY registers after a suspend/resume cycle. Signed-off-by: Alifer Moraes <alifer.m@variscite.com>
imx8mp-var-dart: linux-variscite: Update to latest Add the following commit: d36c69d imx8mp-var-dart: Update machine name Signed-off-by: Alifer Moraes <alifer.m@variscite.com>
imx8qxp-var-som: Add Ethernet suspend/resume script Signed-off-by: Alifer Moraes <alifer.m@variscite.com>
var-som-mx7: linux-variscite: update to latest revision Include the following commits: a9503b3 imx7d-var-som: fec: add 20ms phy-reset-post-delay ad0acb7 imx8mm-var-dart: fec: add 20ms phy-reset-post-delay 4dbaf5d imx8mn-var-som: fec: add 20ms phy-reset-post-delay fe01a41 imx7d-var-som: Override FEC property phy-mode for ADIN PHY ac7c860 net: phy: adin: add adi,phy-mode-override property 7c22598 imx_v7_var_defconfig: Enable driver for ADIN PHY 489e299 imx8_var_defconfig: enable docker requirements 66dba43 Revert "imx8_var_defconfig: add full docker support" 2818198 imx8qm-var-som: dts: ethphy1: Add support for ADIN1300 PHY for VAR-SOM c19da14 MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support 3d6203e imx8_var_defconfig: enable driver for ADIN PHY 3a38158 imx8qm-var-som: refactor to drop imx8qp-var-common.dtsi 8723d43 imx8mn-var-som: update the polarity of camera reset GPIO 2731a98 imx8_var_defconfig: add full docker support 8697f79 imx8mq_var_dart_defconfig: add full docker support 63c1015 imx8mq-var-dart: Introduce support for pcal6408 2a53e3b imx8mm-var-dart: Introduce support for pcal6408 b58250c gpio: pca953x: Introduce standard-regs-fallback property 97b5f35 gpio: pca953x: Introduce support for nxp,pcal6408 f0f2f55 imx8qm-var-som: Introduce support for i.MX8QP SoC 53774d2 imx8qm-var-som: enable internal pullups for i2c0, i2c1, i2c3, i2c4 dbe9792 ARM: dts: VAR-SOM-MX6: force enet_clk to 125 MHz d731d8a Revert "Revert "gpio: pca953x: Disable PM routines"" Signed-off-by: Alexander Herfurtner <alexander.h@variscite.com>
PreviousNext